Справочник Пользователя для Panasonic NV-FJ720

On Screen Display

Press the MENU button U to display the Main menu on
the TV screen.

Press the Cursor buttons (34) S to select [TUNER
PRESET] then press OK button T.

Press the Cursor buttons (34) S to select [CH] then
select the channel number you want tuned by pressing
the Cursor buttons (21) S.

Confirm that [CLEAR] is set to [OFF].

Press the Cursor buttons (34) S to select [AUDIO
SYSTEM] then select the broadcasting system by
pressing the Cursor buttons (21) S.
– BG:

PAL B.G.H/SECAM B.G

– I:

PAL I

– DK:

PAL D/SECAM D.K.K1

– M:

NTSC (For NV-FJ720BD/BDX)

Press the Cursor buttons (34) S to select [COLOUR
SYSTEM] then select [AUTO] by pressing the Cursor
buttons (21) S.
– The VCR automatically distinguishes between PAL,

SECAM and NTSC broadcasts.

– If the picture lacks colour when [AUTO] is selected,

select [MESECAM], [PAL] or [NTSC] (For NV-FJ720BD/
BDX).

Press the Cursor buttons (34) S to select [SEARCH]
then press the Cursor buttons (21)S to start the Manual
Tuning.
– If the desired TV station has not been tuned, press the

Cursor buttons (21) S again.

– Press the MENU button U and repeat steps 3 –7 for

each programme position you want to tune to a station.

Press the MENU button U three times to exit the On
Screen Display.

Follow steps 1 to 3 of Manual Tuning Procedure.

Confirm that [CLEAR] is set to [OFF].

Press the Cursor buttons (34) S to select [SEARCH].

Press the Numeric buttons 2 to enter the number of the
desired programme position.
– For other channels that require tuning, repeat

steps  3–6.

Press the MENU button U twice to exit the On Screen
Display.

Follow steps 1 to 3 of Manual Tuning Procedure.

Press the Cursor buttons (34) S to select [FINE] then
press the Cursor buttons (21) S to obtain the best
tuning condition.
– Press the OK button T to return the tuning to its former

state.

Press the MENU button U to exit
the On Screen Display.

Follow steps 1 to 3 of Manual Tuning Procedure.

Press the Cursor buttons (34) S to select [CLEAR] then
press the Cursor buttons (21) S to select [ON].
– Repeat steps 3–4 for other unused programme

positions to skip during the selection of programme
positions.

– To cancel the blanking of a programme position select

that programme position then set [CLEAR] to [OFF].

Press the MENU button U twice to exit the On Screen
Display.