Справочник Пользователя для Panasonic AG-EZ50UP
20
2
4
RECORD
REC
PAUSE
PAUSE
3
9
¥
°
ø
x
1
2, 3
1
CAMERA
CARD P.B.
VCR
6
7
SEARCH
SEARCH
8
AUTO
MANUAL
AE LOCK
MANUAL
AE LOCK
5
MODE
ON
OFF
POWER
Recording
1
Set the [OFF/ON/MODE] Switch to [ON].
≥The [CAMERA] Lamp lights up.
1
2
Press the Recording Start/Stop Button.
≥Recording starts.
≥After the [RECORD] is displayed, it changes to [REC].
≥After the [RECORD] is displayed, it changes to [REC].
2
≥The Tally Lamp (LED Lamp)
3
lights up during recording and alerts
those being recorded that recording is in progress. The Tally Lamp
does not light up if the [TALLY LED] on the [OTHER FUNCTIONS]
Sub-menu is set to [OFF].
does not light up if the [TALLY LED] on the [OTHER FUNCTIONS]
Sub-menu is set to [OFF].
3
Press the Recording Start/Stop Button again to pause the
recording.
recording.
≥[PAUSE] is displayed.
4
≥If the Recording Pause Mode continues for more than 5 minutes, the power
is turned off automatically for tape protection and power conservation.
To resume recording from this condition, turn on the power again.
To resume recording from this condition, turn on the power again.
≥When recording while the Mode Selector Switch is set to [AUTO]
5
, the
Camera/Recorder automatically adjusts the focus and white balance. (In
some cases, they cannot be adjusted automatically and need to be adjusted
manually.) (
some cases, they cannot be adjusted automatically and need to be adjusted
manually.) (
≥For other notes, see page 46.
ª To Check the Recording
By pressing the [
S] Button
6
in the Recording Pause Mode, you can play
back the last few seconds of the recorded scene.
≥[CHK] is displayed. After checking, the Camera/Recorder resumes the
≥[CHK] is displayed. After checking, the Camera/Recorder resumes the
Recording Pause Mode.
≥For other notes, see page 46.
ª To View the recorded scene while the Recording is
paused (Camera Search)
The recorded scene can be viewed by holding down the [
sSEARCH] Button
7
or [
rSEARCH] Button
8
in the Recording Pause Mode.
The Camera Search function is useful for finding the starting point of a new
scene to create a smooth transition from one scene to another.
≥When the [sSEARCH] Button is pressed, pictures are played back in the
scene to create a smooth transition from one scene to another.
≥When the [sSEARCH] Button is pressed, pictures are played back in the
reverse direction.
≥When the [rSEARCH] Button is pressed, pictures are played back in the
forward direction.
≥For other notes, see page 46.
ª Self-Recording
By opening the LCD Monitor and turning it so that it faces forward (to the lens
side)
side)
9
, you can let the subject in front of the Camera/Recorder monitor the
shot while shooting is in progress.
≥When the LCD Monitor is opened, the Viewfinder is disabled automatically.
≥When the LCD Monitor is opened, the Viewfinder is disabled automatically.
However, when the LCD Monitor is rotated forward, the image is also
shown in the Viewfinder.
shown in the Viewfinder.
≥If you prefer to have the image on the LCD Monitor to look like an image in
a mirror, set [SELF-REC] on the [OTHER FUNCTIONS] Sub-Menu to
[MIRROR]. (Mirror Mode)
Images are recorded normally and no left and right reversal occurs.
[MIRROR]. (Mirror Mode)
Images are recorded normally and no left and right reversal occurs.
≥If [MIRROR] is selected, only recording Indication [¥], recording pause
Indication [
¥;], Card PhotoShot Indication [
ø] and Remaining Battery
Power Indication [
x] are displayed. If a general Warning/Alarm
Indication [
°] appears, return the LCD Monitor to the original position in
order to check the specific content of the Warning/Alarm Indication.
ª To Finish the Recording
Set the [OFF/ON/MODE] Switch to [OFF].