Справочник Пользователя для Mitel 5
Administrator Phone Guide
38
Programming Trunk Group Toll Restrictions
You can program toll restriction classes of service for the trunk groups. See “Programming
Phone Toll Restrictions” on page 20 for more information.
Phone Toll Restrictions” on page 20 for more information.
To program trunk group toll restrictions:
1.
Dial 9932 (9132 in Europe). If a passcode is required (see page 25),
ENTER PASSCODE
appears (otherwise, go to
.
2.
Enter the passcode, and then press #.
ENTER DATABASE OPTION (1 - 3) appears
.
3.
Press 3 or the TRUNK menu button.
ENTER TRUNK OPTION appears
.
4.
Press 2 or the TRUNK GROUP menu button.
ENTER TRUNK GROUP EXTENSION appears.
5.
Enter the extension number, or enter a partial extension number, and then press # or the
ACCEPT menu button. The extension information that best matches the partial number
appears. You can use the Volume buttons or the NEXT and PREVIOUS menu buttons to
scroll through entries.
ACCEPT menu button. The extension information that best matches the partial number
appears. You can use the Volume buttons or the NEXT and PREVIOUS menu buttons to
scroll through entries.
6.
Press # or the ACCEPT menu button to accept the entry. ENTER TRUNK GROUP OPTION
(1 - 6) appears.
(1 - 6) appears.
7.
Press 5 or the TOLL RESTRICTION menu button.
TOLL RESTRICTION OPTION (1 - 4)
appears
.
8.
Select one of the following toll restrictions:
•
COS for day or night mode: For Day Mode, press 1 or the COS DAY menu button,
or press 2 or the COS NIGHT menu button Night Mode.
or press 2 or the COS NIGHT menu button Night Mode.
SET DAY
(or
NIGHT
)
COS
<number> appears
. If necessary, scroll to the correct COS. When the display shows the
correct COS, press 1 or the ON menu button to enable the toll restriction, or press 2
or the OFF menu button to disable it. If applicable, repeat this step to program additional
COS toll restrictions.
or the OFF menu button to disable it. If applicable, repeat this step to program additional
COS toll restrictions.
•
Exempt from ARS: Press 3 or the EXEMPT FROM ARS button.
EXEMPT FROM ARS
appears
. Press 1 or the YES menu button to enable the option, or press 2 or the NO
menu button to disable it.
•
Subject to toll restriction: Press 4 or the SUBJECT TO TOLL menu button. When
the display shows
the display shows
SUBJECT TO TOLL
, press 1 or the YES menu button to enable the
option. Or, press 2 or the NO menu button to disable it.
9.
Press # or the ACCEPT menu button to continue. DATABASE UPDATED appears.
10. When you have finished programming the administrator telephone set, press the Speaker
button or # repeatedly to exit the programming session.
Note:
At any time, you can press
*
to return to the previous menu, or press the Speaker button
to exit the programming session and cancel any unsaved changes.