Справочник Пользователя для Inter-Tel 3000

Inter-Tel 3000 
Administrator’s Manual 

 

 

 103 

 

The time a call to the auto attendant, when the system is in day mode, will ring before the auto attendant 
answers the call. 

The time a call to the auto attendant, when the system is in night mode, will ring before the auto attendant 
answers the call. 

This is the time that elapses before an unanswered incoming call is presented with the System voice 
mailbox greeting. 

This is the maximum length of a message left in a Mailbox or a Greeting for a Mailbox, Auto Attendant or 
Courtesy service. 

The delay allowed for a second digit to be dialed when connected to the Auto Attendant. If a second digit is 
not dialed before this timer expires then the call is presented to a ring group. 

The time a calls rings an extension in a hunt group before it is diverted to the next extension in the group. 

This is the time interval between receiving a message in a mailbox and making the first remote notification 
call. 

When a remote notification call is not successfully completed this is the interval the system waits before 
making the next remote notification call 
 

There are two system reset options available – a warm and a cold reset.  
•  From the Programming extension, press the PROGRAM key.    

•  Press the Scroll Down key ( ) until “System Programming” is displayed. 

•  Select “System Programming”. 

•  Enter the System Programming Password and select “System”. 

•  Press the Scroll Down key ( ) until “Reset Options” is displayed. 

•  Select “Reset!” or “Reset To Default!”. 
 
CAUTION: These are complete system resets, not individual extension resets. 
Selecting “Reset!” (warm reset) will reset the  system and cut off all established calls. 
Selecting “Reset To Default!” (cold reset) will reset the system, cut off all established calls and 
remove all programming from the system.