Справочник Пользователя для Inter-Tel 3000
Inter-Tel 3000
Administrator’s Manual
Administrator’s Manual
113
• If “Preferred” is selected, the calls will be routed on any available line, if none of the selected lines are
available. In this case, the output code is not dialed.
Press the speakerphone key to finish programming.
Note: Lines 1, 2 etc. are the T1 lines programmed as equipped in the Equipped Lines Programming,
Lines 25-28 are any CO lines equipped.
Selecting lines when PRI is programmed
When the option to select lines is presented the menu is updated to the 'PRI' access and the back up CO
lines equipped. LCR Codes are programmed as follows:
lines equipped. LCR Codes are programmed as follows:
• From the programming extension, press the PROGRAM key.
• Press the Scroll Down key ( ) until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Lines”.
• Scroll Down and select “LCR Codes”.
• Select “LCR On” to activate the feature.
• Enter in a code index (01-50).
• Enter an input code (Up to 5 digits). Press “Confirm”. This is the code dialed by the user.
• Enter an output code (Up to 9 digits). This is the code that will be inserted before the telephone number
that the user dials. This code can be used to select a specific telephone company.
• Select the preferred or exclusive option.
•
If “Exclusive” is selected, the calls can only be sent on the lines selected.
• If “Preferred” is selected, the calls will be routed on any available line, if none of the selected lines are
available. In this case, the output code is not dialed.
Press the speakerphone key to finish programming.
Note:
Note:
If PRI is selected the LCR programming applies to all B-channels available.
Lines 24-26 are the CO lines if equipped.
Lines 24-26 are the CO lines if equipped.
SYSTEM VOICE MAILBOX PROGRAMMING
System Voice Mailbox Programming when T1 is programmed
System voice mailbox is programmed as follows:
• From the programming extension, press the PROGRAM key.
• Press the Scroll Down key ( ) until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Lines”.
• Press the Scroll Down key ( ) until “System Voice Box” is displayed.
• Select “System Voice Box”.
• Select the lines to be answered by the System Voice mailbox. The lines that will be answered are
indicated by a “
♦”.
Press the speakerphone key to finish programming.
Note: Lines 1,2 etc. are the T1 lines programmed as equipped in the Equipped Lines Programming, Lines
25 - 28 are CO lines.
System Voice Mailbox Programming when a PRI is programmed
System voice mailbox is programmed as follows:
• From the programming extension, press the PROGRAM key.
• From the programming extension, press the PROGRAM key.
• Press the Scroll Down key ( ) until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Lines”.