Справочник Пользователя для Inter-Tel 3000
Inter-Tel 3000
Administrator’s Manual
70
• If your digital telephone set is not ringing for the call, you can examine the incoming call ID by
selecting “Examine Incoming Call”. The same information shown on the ringing digital telephone sets
is then displayed.
is then displayed.
Programming the System to Display Caller ID Information
If you subscribe to the Caller ID service from your telephone company, then you can program the system to
display caller numbers.
• From the Programming extension, press the PROGRAM key.
display caller numbers.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key ( ) until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Lines”.
• Press the Scroll Down key ( ) until “PSTN Programming” is displayed.
• Select “PSTN Programming”.
• Press the Scroll Down key ( ) until “Caller ID Detection” is displayed.
• Select “Caller ID Detection”.
• Select the Lines that have the Caller ID service enabled. The lines you select will have a “♦”
• Select the Lines that have the Caller ID service enabled. The lines you select will have a “♦”
displayed beside them.
Press the speakerphone key to finish programming.
To Associate a Caller Number with a Name and Route the Call to an
Extension
Extension
Up to 100 names, each a maximum of ten characters (including spaces), can be associated with caller
telephone numbers. When a number with an associated name is received, the name and number are flashed
on the display of ringing digital telephone sets.
Furthermore, an extension number can also be associated with a telephone number. In this case, an
incoming call from that number will automatically route to and ring at only that extension.
telephone numbers. When a number with an associated name is received, the name and number are flashed
on the display of ringing digital telephone sets.
Furthermore, an extension number can also be associated with a telephone number. In this case, an
incoming call from that number will automatically route to and ring at only that extension.
• From the programming extension, press the PROGRAM key.
• Press the Scroll Down key ( ) until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Lines”.
• Press the Scroll Down key ( ) until “Caller ID Programming” is displayed.
• Select “Caller ID Programming.”
• Select an Index Number (001 - 100).
• Enter the caller telephone number.
• Press “Confirm”.