Справочник Пользователя для Sunrise Medical P-220

Скачать
Страница из 29
930475 Rev. A
X I I .   M a i n t e n a n c e
49
X I .   B a t t e r i e s
930475 Rev. A
48
A. NOTES 
1. Proper maintenance will improve performance and extend the useful life 
of your chair. 
2. Clean your chair regularly. This will help you find loose or worn parts and will
make your chair easier to use. 
3. To protect your investment, have all major service and repair work done by your
supplier.
1. Your chair needs regular maintenance for peak performance and to avoid
injury from chair failure, damage or premature wear.
2. Inspect and maintain this chair strictly per the “Maintenance Chart”. (p. 51)
3. If you detect a problem, make sure to service or repair the chair before use.
4. At least once a year, have a complete safety check and service of your chair 
performed by a supplier.
B.  CLEANING 
1. Paint Finish: 
• Clean the paint finish with mild soapy water monthly. 
• Protect the paint with a coat of non-abrasive auto wax every three months. 
2. Motors: 
• Clean around motor area weekly with a slightly damp (not wet) cloth. 
• Wipe off or blow away any fluff, dust, or dirt on or around the motors. 
• Note: You do not need to grease or oil the chair. 
3. Upholstery: 
• Hand-wash only as needed. Machine washing may damage fabric. 
• Drip-dry only. Heat from a dryer may damage fabric. 
NOTE– Washing the fabric may decrease fire retardant properties. 
C. STORAGE TIPS 
1. Store your chair in a clean, dry area. If you fail to do so, parts may rust or corrode. 
2. Before using your chair, make sure it is in proper working order. Inspect and service
all items on the “Maintenance Chart” (See p. 51) 
3. If you store this chair for more than three months, have it inspected by a supplier
before use.
Always:
1. Use the charger that comes with 
your wheelchair. Read and follow all instructions
and warnings. 
2. Make sure room is well ventilated. 
3. Turn off all power to your chair. 
4. Connect and disconnect battery cables with cau-
tion. Only connect the charger to the power sup-
ply after the charger has been connected to the
chair
5. Make sure to allow enough time to fully charge
batteries.
Note: Batteries should never be left for long
periods in the discharged state. Unused or stored
batteries should be given a charge once per
month.
6. Charge batteries by engaging charger connector
(A) to the charger/programmer port (B) located
on the joystick.
F. DISPOSING OF BATTERIES
1. All batteries once they have reached the end of
their useful life are deemed to be hazardous
waste.
2. For further information on handling and recycling
contact your local 
recycling authority.
3. Always dispose of product through a recognized
agent.
A
B