Справочник ПользователяСодержаниеLocating Front Module3Installing switch cubes4Installing the Display Module5To Replace the Connector End on a Cable.6Front (Tank) Module9The following outputs and operations are controlled by the Front Module:9Rear Module9Left Handlebar Switch Module Functions1015Lighting15Turn Signal Function:16The turn signal selection buttons are located on the left and right handle bar switch cubes. The turn signals are activated by pressing the appropriate button. The turn signals will flash for 7 seconds then automatically cancel. The number of flashes or16Additional Features:16Turn Signal Count Down: With self-canceling turn signals, it is a definite advantage to be able to know when the self-canceling feature will stop flashing the turn signal. This feature shows you the remaining flashes on the LCD display screen. When the t16Turn Signal Hold: If the brakes are applied after a turn signal has been selected, the flashers will continue to flash as long as the brakes are applied plus 10 seconds. This feature is beneficial when stopped at a signal light, it will keep the turn sig16Hazard Flashers: When selected will flash until cancelled and a hazard icon will be shown on the LCD display screen. To engage, depress both the left and right turn signal buttons for 1 second. To cancel, depress both buttons again for one second.16Brake Lights: When the brakes are applied and the motorcycle is stopped, the brakes remain on until the bike accelerates. This will also cause the turn signals to continue to flash 10 seconds after the bike accelerates.17Measured Mile Mode:19Memory:20System Specification:212323One Year Limited Warranty23Размер: 1,9 МБСтраницы: 23Язык: EnglishПросмотреть
