Инструкции для Honeywell 9782 Series

Содержание

• 1. INTRODUCTION

  1
• 1.1 Description

  1
• Multi-function instrument

  1
• User interface

  1
• Easy to configure

  1
• Input

  1
• Outputs

  1
• DE (Digital integration)

  1
• Relays

  1
• 1.2 Features

  1
• Automatic cell washing

  1
• Computed values

  1
• Automatic range scaling

  1
• Password protection

  1
• Extensive diagnostics

  1
• Watertight corrosion-resistant case

  1
• Solution Temperature Compensation

  1
• 1.3 Operating the Analyzer/Controller

  1
• 1.3.1 Keypad Use

  1
• Front panel keys used for all operator tasks

  1
• Selecting a parameter for edit

  1
• Editing a parameter assignment from a list of available choices

  1
• Editing a parameter numeric value

  1
• Controlling an AutoClean operation manually

  1
• 1.3.2 Online Displays

  1
• Introduction

  1
• Individual cell display

  1
• Combined display

  1
• Computed value

  1
• Clock and AutoClean

  1
• 1.4 Menu Hierarchy

  1
• Menus for every task

  1
• 1.5 Planning

  1
• 1.5.1 Overview

  1
• Configuration system minimizes decisions

  1
• 1.5.2 Using Relays

  1
• Relays assigned during I/O setup

  1
• Interactions affecting permitted relay assignments

  1
• 1.5.3 Deciding on a Control Strategy

  1
• All 9782 models can use relays for control

  1
• Optional analog outputs for control

  1
• Selecting a strategy

  1
• 1.6 Overview of Installation and Setup Tasks

  1
• Setup tasks described in this manual

  1
• 2. SPECIFICATIONS AND MODEL NUMBER

  2
• 2.1 Specifications

  2
• 2.1.1 User Interface

  2
• Display

  2
• Keypad

  2
• 2.1.2 Physical

  2
• Case

  2
• Case Dimensions

  2
• Weight

  2
• Mounting

  2
• 2.1.3 Compliance

  2
• CE conformity

  2
• Year 2000

  2
• 2.1.4 Electrical

  2
• Power Requirements

  2
• Fuse Rating

  2
• 2.1.5 Model Ranges

  2
• Standard range models

  2
• Wide range models

  2
• 2.1.6 Operating Conditions

  2
• Operating Conditions

  2
• Performance under reference operating conditions

  2
• Operating Influences under normal operating conditions

  2
• 2.1.7 Outputs

  2
• Standard alarm/control relays

  2
• Optional alarm/control relays

  2
• Optional analog outputs

  2
• Optional Digital Communication Link

  2
• 2.1.8 Temperature Compensation

  2
• Availability

  2
• 2.1.9 AutoClean

  2
• Cell rinse schedule settings

  2
• 2.1.10 Control

  2
• Settings

  2
• 2.1.11 Computed Values

  2
• Available selections

  2
• 2.2 Model Number Breakdown

  2
• Introduction

  2
• 3. UNPACKING, PREPARATION, AND MOUNTING

  3
• 3.1 Overview

  3
• Introduction

  3
• What’s in this section?

  3
• 3.2 Unpacking and Preparing

  3
• Procedure

  3
• 3.3 Mounting

  3
• Introduction

  3
• Panel-mounting

  3
• Wall- and pipe-mounting

  3
• 4. POWER WIRING

  4
• 4.1 Overview

  4
• Introduction

  4
• What’s in this section?

  4
• 4.2 General Wiring Practices for Power Wiring

  4
• Safety precautions

  4
• Avoid damage to components

  4
• Wiring for immunity compliance

  4
• Conform to code

  4
• 4.3 Power Wiring Considerations

  4
• Recommended wire size

  4
• Power supply voltage and frequency within specs

  4
• 4.4 Installing Power Wiring

  4
• Procedure

  4
• 5. I/O SETUP AND SYSTEM CONFIGURATION

  5
• 5.1 Overview

  5
• Introduction

  5
• What’s in this section?

  5
• Powering up the Analyzer/Controller

  5
• 5.2 I/O Setup and Configuration Tasks

  5
• Ease of configuration

  5
• Accessing the I/O setup and configuration menus

  5
• Purpose of I/O setup

  5
• Purpose of configuration menu items

  5
• Illustrations

  5
• System defaults

  5
• 5.3 Performing I/O Setup

  5
• Purpose

  5
• Display resolution and unit of measure

  5
• Purpose

  5
• Procedure

  5
• Purpose

  5
• Procedure

  5
• 5.6 Configuring Alarms

  5
• Purpose

  5
• Procedure

  5
• 5.7 Setting the Clock

  5
• Purpose

  5
• Procedure

  5
• 5.8 Configuring AutoClean

  5
• Purpose

  5
• Timer-initiated operation

  5
• Operator-initiated operation

  5
• Hold mode

  5
• 5.9 Selecting a Computed Value to Be Displayed

  5
• Purpose

  5
• Procedure

  5
• 5.10 Summary of Menu Choices and System Defaults

  5
• Introduction

  5
• 6. INPUT AND OUTPUT WIRING

  6
• 6.1 Overview

  6
• Introduction

  6
• What’s in this section?

  6
• 6.2 General Wiring Practices for I/O Wiring

  6
• Safety precaution

  6
• Avoid damage to components

  6
• Immunity Compliance

  6
• Conform to code

  6
• Recommended maximum wire size

  6
• Cables for locations without interference

  6
• Shielded wiring for locations with interference

  6
• Avoiding interference

  6
• References

  6
• 6.3 Wiring Analog Inputs and Outputs

  6
• Introduction

  6
• Cell identification significant to computed value

  6
• Procedure

  6
• 6.4 Wiring Relays

  6
• 6.4.1 Installation

  6
• Introduction

  6
• Procedure

  6
• 6.4.2 Disconnecting RC Arc Suppression Circuits

  6
• Introduction

  6
• Procedure

  6
• 6.4.3 Wiring a Device to the Relay Indicating Output Range Status

  6
• Introduction

  6
• Interconnections

  6
• 7. AUTOCLEAN THEORY AND PIPING

  7
• 7.1 Overview

  7
• Introduction

  7
• What’s in this section?

  7
• 7.2 AutoClean Sequence and Piping

  7
• Rinse sequence

  7
• Select valves and fittings with appropriate pressure ratings

  7
• Minimize liquid volume in system

  7
• 8. CALIBRATION

  8
• 8.1 Overview

  8
• Introduction

  8
• What’s in this section?

  8
• Calibration menu customized for different configurations

  8
• 8.2 Recommendations for Successful Measurement and Calibration

  8
• Selection and care of cell essential

  8
• Recommendations

  8
• 8.3 Entering the Cal Factor for Each Cell

  8
• Introduction

  8
• Procedure

  8
• 8.4 Performing Calibration Trim

  8
• Introduction

  8
• 8.5 Removing Calibration Trim Values

  8
• Introduction

  8
• Procedure

  8
• 8.6 Determining and Entering the TDS Conversion Factor

  8
• Introduction

  8
• Determining TDS conversion factor

  8
• Out-of range-values forced to closest limit

  8
• Calibrate the Analyzer/Controller before entering TDS conversion factor

  8
• Procedure

  8
• 9. DIAGNOSTICS AND MESSAGES

  9
• 9.1 Overview

  9
• Introduction

  9
• What’s in this section?

  9
• 9.2 System Status Messages

  9
• Related to operation of Analyzer/Controller

  9
• 9.3 Process Alarm Messages

  9
• Alarms dependent on configuration

  9
• 9.4 On-Line Diagnostics and System Error Messages

  9
• Self-tests at 0.5 second intervals

  9
• Output affected by error

  9
• 9.5 Off-Line Diagnostics

  9
• Introduction

  9
• 9.5.1 Display and Keyboard Test

  9
• Procedure

  9
• 9.5.2 Output Tests

  9
• Procedure

  9
• 10. MAINTENANCE

  10
• 10.1 Overview

  10
• Introduction

  10
• What’s in this section?

  10
• 10.2 Output Calibration

  10
• Introduction

  10
• Required equipment

  10
• Procedure

  10
• 10.3 Specifying a Tagname or Other Display String

  10
• Introduction

  10
• Procedure

  10
• 10.4 Viewing Product Information and Changing Model Number Stored in Memory

  10
• Introduction

  10
• Procedure

  10
• 10.5 Adjusting the Screen Contrast

  10
• Introduction

  10
• Procedure

  10
• 10.6 Entering a Password for Security

  10
• Introduction

  10
• Procedure

  10
• 10.7 Resetting All Configuration and Calibration Values to Factory Settings

  10
• Introduction

  10
• Procedure

  10
• 10.8 Entering Values for Lead Resistance Compensation (Wide Range Only)

  10
• Introduction

  10
• Procedure

  10
• 10.9 Replacing the Fuse

  10
• Introduction

  10
• Procedure

  10
• 11. ACCESSORIES AND REPLACEMENT PARTS LIST

  11
• 11.1 Overview

  11
• Introduction

  11
• What’s in this section?

  11
• 11.2 Part Numbers

  11
• Introduction

  11
• Key Functions

  1
• 9782 Conductivity/Resistivity Analyzer/Controller Menu Hierarchy

  1
• Available Combinations of Relay Assigments

  1
• Overview of Analyzer/Controller Installation Tasks

  1
• Table 3-1 Procedure for Unpacking and Preparing the 9782

  3
• Table 4-1 Procedure for Installing AC Power Wiring

  4
• Table 5-1 Procedure for Performing I/O Setup

  5
• Table 5-2 Procedure for Configuring CAT Control and/or Retransmission of Process Variables

  5
• Table 5-3 Procedure for Configuring On/Off Control

  5
• Table 5-4 Procedure for Configuring PFT Control

  5
• Table 5-5 Procedure for Configuring DAT Control

  5
• Table 5-6 Procedure for Configuring Alarms

  5
• Table 5-7 Procedure for Setting the Clock

  5
• Table 5-8 Procedure for Configuring AutoClean

  5
• Table 5-9 Procedure for Specifying a Computed Value

  5
• Table 5-10 Menu Choices and System Defaults

  5
• Recommended Maximum Wire Size

  6
• Procedure for Installing Analog I/O Wiring

  6
• Relay Contact Maximum Ratings

  6
• Procedure for Wiring Relays

  6
• Procedure for Disconnecting RC Arc Suppression Circuits

  6
• Procedure for Entering Cal Factor

  8
• Conductivity of Potassium Chloride Solutions at 25 °C

  8
• Procedure for Performing Calibration Trim Using a Reference Solution

  8
• Procedure for Removing Calibration Trim Values

  8
• Procedure for Entering TDS Conversion Factor

  8
• System Status Message

  9
• Process Alarm Messages

  9
• On-Line Diagnostics and System Error Messages

  9
• Procedure For Initiating Display and Keyboard Tests

  9
• Procedure for Testing Relays and Analog Outputs

  9
• Procedure for Calibrating Outputs

  10
• Procedure for Specifying a Tagname or Other Display String

  10
• Procedure for Adjusting the Screen Contrast

  10
• Procedure for Entering a Password

  10
• Procedure for Resetting All Configuration to Factory Settings

  10
• Procedure for Entering Values for Lead Resistance Compensation

  10
• Table 10-8 Procedure for Replacing the Fuse

  10
• Table 11-1 Part Numbers

  11
• 9782 Front Panel

  1
• Representative Process Value Display for a Cell in Standard Range Analyzer

  1
• Representative Combined Display

  1
• Representative Computed Value Display

  1
• AutoClean Display

  1
• Figure 3-1 Sample Nameplate

  3
• Figure 3-2-1 Mounting and Dimensions - Non-Backlit Display Option

  3
• Figure 3-2-2 Mounting and Dimensions - Non-Backlit Display Option

  3
• Figure 3-3-1 Mounting and Dimensions - Backlit Display Option

  3
• Figure 3-3-2 Mounting and Dimensions - Backlit Display Option

  3
• Figure 4-1 AC Power Terminals

  4
• Figure 6-1 Terminal Connections

  6
• Condensate Monitoring

  6
• Figure 7-1 Automatic Cell Wash Setup

  7
• Figure 10-1 Example of a Conductivity Loop

  10
• Figure 10-2 Location of Power Fuse

  10