Справочник ПользователяСодержаниеContents5Safety and Environmental Notices9Danger Notice9Caution Notice9Attention Notice10Laser Safety and Compliance10Preface11Intended Audience11Related Publications11IBM Ultrium Publications11IBM Fibre Channel Publications11Other Publications11Chapter 1. Introduction13Cartridge Compatibility14Speed Matching and Channel Calibration14Sleep Mode14Supported Servers and Operating Systems15SCSI Attachment16Physical Characteristics of the SCSI Interface16Speed16Address Assignments17Installing, Removing, or Resetting a Drive on an Active SCSI Bus17Fibre Channel Attachment18Supported Topologies18Speed19Address Assignments19World Wide Names20Physical Characteristics of the Fibre Channel Interface20Installing, Removing, or Resetting a Drive on an Active Fibre Channel20Supported Device Drivers21Chapter 2. Specifications23Chapter 3. Installing the Tape Drive25Rear View of the SCSI Drive26Rear View of the Fibre Channel Drive27Step 1. Unpack the Drive28Step 2. Remove Power from the Enclosure28Step 3. Set the SCSI ID or Arbitrated Loop Physical Address29Setting the SCSI ID (SCSI Drive Only)29Setting the SCSI ID with Jumpers29Setting the SCSI ID with a SCSI ID Switch30Setting the SCSI ID Through the LDI Interface30Supplying TERMPOWER (SCSI Drive Only)30Setting the Arbitrated Loop Physical Address (Fibre Channel Drive Only)31Setting the Loop ID to Provide Status About the Loop32Setting the Loop ID to Provide Additional Loop IDs34Step 4. Change the Link Services of the Drive (optional)36Step 5. Mount the Tape Drive into the Enclosure38Step 6. Connect and Test Power to the Tape Drive39Step 7. Connect the Internal SCSI or Fibre Channel Cable39Step 8. Connect the Internal LDI Cable (optional)40Step 9. Run Drive Diagnostics40Step 10. Install the Device Drivers40Step 11. Connect the External SCSI or Fibre Channel Interface to the Server40Connect the External SCSI Interface to the Server40Connect the External Fibre Channel Interface to the Server41Step 12. Connect the External LDI Interface to the Server (optional)41Step 13. Configure the Tape Drive to the Server, Switch, or Hub41Chapter 4. Operating the Tape Drive43Status Light44Unload Button45Single-Character Display45Single Red Dot45Inserting a Tape Cartridge46Removing a Tape Cartridge47Cleaning the Drive Head47Selecting a Diagnostic or Maintenance Function48Exiting Maintenance Mode57Updating the Firmware57Updating Firmware through the SCSI or Fibre Channel Interface57Updating Firmware through the Library/Drive Interface57Updating the Firmware with an FMR Tape Cartridge58Chapter 5. Using the Media59Data Cartridge60Cleaning Cartridges61Setting the Write-Protect Switch62Handling the Cartridges62Provide Training63Ensure Proper Packaging63Provide Proper Acclimation and Environmental Conditions64Perform a Thorough Inspection64Handle the Cartridge Carefully65Examples of Cartridge Problems66Repositioning or Reattaching a Leader Pin67Repositioning a Leader Pin67Reattaching a Leader Pin69Environmental and Shipping Specifications for Tape Cartridges74Disposing of Tape Cartridges75Ordering Media Supplies75Ordering Custom Bar Code Labels76Chapter 6. Resolving Problems77Methods of Receiving Errors and Messages78Descriptions and Corrective Actions for Errors and Messages79Using Sense Data83Obtaining Error Information from the AS/400 or iSeries with RISC Processor83Obtaining Error Information from the RS/6000 or pSeries84Obtaining a Drive Dump87Using the Drive to Obtain a Dump87Using a Device Driver Utility to Obtain a Dump87Viewing the Drive Error Log88Resolving Problems Reported by the Server89Fixing SCSI Bus Errors89Fixing a Consistent Error with a Single Drive on a SCSI Bus89Fixing a Consistent Error with Multiple Drives on a SCSI Bus89Fixing an Intermittent Error with a Single Drive on a SCSI Bus90Fixing an Intermittent Error with Multiples Drives on a SCSI Bus90Fixing Fibre Channel Errors91Starting Problem Determination91Fixing a Consistent Error with a Single Drive on a Fibre Channel Loop91Fixing a Consistent Error with Multiple Drives on a Fibre Channel Loop92Fixing a Consistent Error in a Point-to-Point Topology92Fixing Intermittent Fibre Channel Errors93Resolving Media-Related Problems94Chapter 7. Servicing the Tape Drive95Removing a SCSI Tape Drive from an Enclosure95Removing a Fibre Channel Tape Drive from an Enclosure96Manually Removing a Tape Cartridge97Removing the Cartridge97Fixing an Internal Jam100Appendix A. Tools and Supplies107Appendix B. TapeAlert Flags109TapeAlert Flags Supported by the Drive109Notices113Trademarks113Electronic Emission Notices114Special Considerations for Electromagnetic Compatibility114IBM TotalStorage LTO Ultrium 2 Tape Drive Models T400 and T400F114Federal Communications Commission (FCC) Class B Statement114Industry Canada Class B Emission Compliance Statement114Avis de conformité à la réglementation d'Industrie Canada114European Union (EU) Electromagnetic Compatibility Directive115Germany Electromagnetic Compatibility Directive115Japan VCCI Class B ITE Electronic Emission Statement115Getting Help116Warranty116Glossary117Index129Размер: 2,8 МБСтраницы: 136Язык: EnglishПросмотреть