3M SC 250/900m 用户手册

5

78-0013-1746-6-E

2.3 

Remove the 3M

™

 Crimplok

™

+ Connector from the bag and remove the dust cap from the ferrule. Remove the 

lapping film disc from the bag and set it aside for later.

2.4 

Insert the connector into the SC port with the actuation cap facing upward. Ensure the connector is fully seated in 

the port.

Actuation Cap

3.0   Fiber Stripping & Cleaving

3.1 

Open both covers on the cleaver. Move the blade 

carriage to the front. Once per day, or whenever the 

cleaver gets dirty, clean the fiber groove, rubber pads 

and blade with the brush.

3.2 

If working with cable, strip at least 230 mm (9 in.) 

of cable jacket away to expose just 900 or 250    µm 

coating. Holding the fiber stripper perpendicular 

to the fiber, strip enough 900 or 250 µm coating 

(minimum of 40 mm) to allow the fiber to extend 

well beyond the second pad on the cleaver as shown 

in Section 3.7.