Impex AX-PWR7 用户手册

 

Tools Required Assembling the Machine:  Two Adjustable Wrenches and Allen 
Wrenches 
NOTE:  It is strongly recommended this machine be assembled by two or more people 
to avoid possible injury. 
 
STEP 1     (See Diagram 1) 
A.)  Attach the Main Frame (#1) to the Front & Rear Stabilizers (#2 & 3).  Secure each end 

with two M10 x ¾” Allen Bolts (#36) and 

∅

 ¾” Washers (#42).  Attach a Lock Knob (#23) 

to the hole underneath the Main Frame.  

B.)  Slide the Sliding Block (#8) onto the Incline Adjustment Bar (#9).  Align the hole then 

secure it with a Knob Lock (#23) to hold the Sliding Block in position.  

C.)  Attach the Incline Adjustment Bar to the brackets on the Main Frame.  Secure each end 

with one M10 x 2 ½” Carriage Bolt (#35), 

∅

 ¾” Washer (#42), and M10 Aircraft Nut (#44).