Rotel RR-1060 用户手册

26

RR-1060

7. A conﬁrmation appears in the LCD. Use the

UP/DOWN buttons to select either YES (to

change the command) or NO (to discard the

changes). Press ENT to conﬁrm.

NOTE

: If you attempt to change an unprogrammed

Smart Macro button, the word EMPTY appears

and the remote returns to normal mode.

Clearing learned commands

You can clear a single learned command, a multi-

step command, all of the learned commands for a

single DEVICE/INPUT button, or all of the learned

commands for all DEVICE/INPUT buttons:

Clearing a Single Learned Command

1. Press the DEVICE/INPUT button where the

learned command is stored.

2. Press the SETUP button (the LCD displays SET-

UP). Press the UP/DOWN cursor buttons un-

til EDIT appears in the display. Press the ENT

button to conﬁrm.

3. Press the UP/DOWN cursor buttons until CLEAR

ONE KEY appears in the display. Press the

ENT button to conﬁrm.

4. When the SELECT KEY prompt is displayed,

press the command button you wish to

clear.

5. A conﬁrmation message appears in the LCD.

Use the UP/DOWN buttons to select either

YES (to clear the learned command) or NO

(to keep command). Press the ENT button to

conﬁrm.

Clearing All Learned Commands

for a DEVICE/INPUT Button

1. Press the DEVICE/INPUT button where the

learned command is stored.

2. Press the SETUP button (the LCD displays SET-

UP). Press the UP/DOWN cursor buttons un-

til EDIT appears in the display. Press the ENT

button to conﬁrm.