Toshiba H-9100N-CA 用户手册
15. ERROR MESSAGE TABLE
15. ERROR MESSAGE TABLE
15- 1
15. ERROR MESSAGE TABLE
Take the following action if an error message appears on the commodity name display along with the
buzzer sounding.
buzzer sounding.
●
Programming Mode
Message
Cause
Solution
DATA ENTRY ERROR
Error in key input.
Press the
key, and re-input the
right data.
MEMORY FULL
No memory space to set PLU.
Press the
key, and delete
unnecessary PLUs.
DUPLICATE PLU
The PLU # being changed is
already registered.
already registered.
Press the
key, and check the
PLU.
PLU NOT FOUND
The PLU # being called is not
registered.
registered.
Press the
key, and set the data to
free PLU#.
CHARACTER OVERRUN
Attempt is made to set more
than max. allowed number of
characters.
than max. allowed number of
characters.
Press the
key, and re-input the
right data.
PRT FAILURE DETECTED Printer trouble.
1. Check that the media and print head
are set correctly.
2. If the label home position is misaligned,
press the
key.
LABEL OVERRUN
Label overruns.
Press the
key.
RESTORE THE PLUS
The capacity of RAM was
changed with the ingredient
data stored.
changed with the ingredient
data stored.
Press the
key and save the
ingredient data. Then delete the data from
the memory of the unit. After that change
the capacity of RAM and load the data to
the unit.
the memory of the unit. After that change
the capacity of RAM and load the data to
the unit.
If you cannot solve the problem with the following solution instruction, do not attempt further
troubleshooting by yourself. Turn the power off, unplug the scale, then contact your Authorized
Service representative for assistance.
Do not attempt to repair or adjust alone, because electrical equipment is dangerous.
troubleshooting by yourself. Turn the power off, unplug the scale, then contact your Authorized
Service representative for assistance.
Do not attempt to repair or adjust alone, because electrical equipment is dangerous.
CLEAR
CLEAR
CLEAR
CLEAR
CLEAR
FEED
FEED
CLEAR
WARNING!