Toshiba DKT3000 用户手册

Use your 

Msg 

LED/button and LCD to see/retrieve message(s).

An extension can receive up to four simultaneous Message Waiting indications and LCD messages. 

One message is reserved for the Message Center.
Your telephone can be programmed to have up to four additional (flexible) Message Waiting buttons/

LEDs. Check with your CTX System Administrator to see if these buttons have been programmed on 

your telephone. If so, substitute them when the 

Msg

 button/LED is mentioned in the following steps.

1. On an LCD telephone, if you see a “+,” press 

Scroll

 to display additional messages; otherwise, go to 

Step 2. The “+” indicates additional messages. The LCD can show up to three station messages for 

your extension and three for each additional (phantom) extension that you may have.

2. Press 

Msg

, then lift the handset. Your telephone rings the extension or voice mail device that sent the 

indication. The LED continues to flash red. 

3. After answering the message(s), place the handset back on-hook.
4. If the Msg LED continues to flash, you have more messages; repeat Steps 1~3 above to retrieve them. 

Voice mail devices turn off the LED/LCD indications after a short delay, after you checked all 

messages.

5. To manually turn off your Msg LED, press your extension button, then press 

#409

. Do this step for 

each message received.