Nokia 6102 用户手册
S e t t i n g s
Nokia 6101 and Nokia 6102 User Guide
46
Copyright © 2005 Nokia
Select
Always online
to set the phone to automatically connect to an packet data
network when it is switched on.
indicates a packet data connection.
Modem settings
You can connect the phone using an IR or a data cable (CA-42) connection to a
compatible PC, and use the phone as a modem to enable packet data connectivity
from the PC.
compatible PC, and use the phone as a modem to enable packet data connectivity
from the PC.
To define the settings for connections from the PC, select
Menu
>
Settings
>
Connectivity
>
Packet data
>
Packet data settings
>
Active access point
, activate
the access point you want to use, and select
Edit active access point
. Select
Alias
for access point
, and enter a nick name for the currently selected access point.
Select
Packet data access point
, and enter the access point name (APN) to
establish a connection to an EGPRS network.
You can also set the dial-up service settings (access point name) on your PC using
the Nokia Modem Options software. See “PC Suite,” p. 70. If you have set the
settings both on the PC and on your phone, the PC settings are used.
the Nokia Modem Options software. See “PC Suite,” p. 70. If you have set the
settings both on the PC and on your phone, the PC settings are used.
■ Enhancements
This menu is shown only if the phone is or has been connected to a compatible
mobile enhancement.
mobile enhancement.
Select
Menu
>
Settings
>
Enhancements
. You can select an enhancement menu
if the corresponding enhancement is, or has been, connected to the phone.
Depending on the enhancement, select from the following options:
Depending on the enhancement, select from the following options:
Default profile
— to select the profile that you want to be automatically activated
when you connect to the selected enhancement
Automatic answer
— to set the phone to answer an incoming call automatically
after 5 seconds. If
Incoming call alert
is set to
Beep once
or
Off
, automatic answer
is off.
Lights
— to set the lights permanently
On
. Select
Automatic
to set the lights on
for 15 seconds after a key press
TTY/TDD
>
Use TTY
>
Yes
— to use the TTY settings instead of headset or loopset
settings
6101_Env1_9240568_KP.fm Page 46 Friday, May 6, 2005 10:24 AM