Toshiba GC10-QM 用户手册
- 109 -
(12) MaxiCode data
For mode 0 or 1:
[ESC] RBaa; bbbbbbbbbcccdddeeeee --- eeeee [LF] [NUL]
For mode 2 or 3:
[ESC] RBaa; bbbbbbbbbcccdddeeeee --- eeeee [LF] [NUL]
For mode 4 or 6:
[ESC] RBaa; fffffffffggggg --- ggggg [LF] [NUL]
c
bbbbbbbbb:
Postal code
Fixed as 9 digits
• Mode 0 or 2:
b1b2b3b4b5:
Zip code
Fixed as 5 digits (Numerics)
b6b7b8b9:
Zip code extension Fixed as 4 digits (Numerics)
• Mode 1 or 3:
b1b2b3b4b5b6: Zip code
Fixed as 6 digits (Character “A” of
code set)
b7b8b9:
Vacant
Fixed as 3 digits (20H)
d
ccc:
Class of service
Fixed as 3 digits (Numerics)
e
ddd:
Country code
Fixed as 3 digits (Numerics)
f
eee --- eee: Message data strings
84 digits
g
fffffffff:
Primary
message data strings
9 digits
h
ggg --- ggg: Secondary message data strings
84 digits
NOTES:
1. When anything other than numerics is included in the data string of zip
code (mode 2), zip code extension, class of service or country code, a
MaxiCode is not drawn.
MaxiCode is not drawn.
2. If the message data is less than 84 digits when mode 2 or 3 is selected,
the printer adds a CR (000000) at the end of the data, and the remaining
digits will be padded with FSs (011100). When message data exceeding
84 digits is received, the excess data will be discarded before drawing a
MaxiCode.
digits will be padded with FSs (011100). When message data exceeding
84 digits is received, the excess data will be discarded before drawing a
MaxiCode.
3. If the message data is less than 93 digits (9 digits + 84 digits) when mode
4 or 6 is selected, the printer adds a CR (000000) at the end of the data,
and the remaining digits will be padded with FSs (011100). When
message data exceeding 93 digits is received, the excess data will be
discarded before drawing a MaxiCode.
and the remaining digits will be padded with FSs (011100). When
message data exceeding 93 digits is received, the excess data will be
discarded before drawing a MaxiCode.
4. Mode 6 should not be used for usual operation since it is used for
scanner programming.