Toshiba SD-P2900SR 用户手册

下载
页码 80
75
Other
s
Before calling service personnel
Symptom
Cause
Correction
No power.
•  The AC adapter or power plug is 
disconnected.
• Connect the AC adapter or power plug securely.
•  The battery pack has been removed.
•  Install the battery pack.
•  Battery empty.
•  Re-charge the battery.
The LCD turned off by 
itself.
• The automatic LCD off function turned 
the LCD off.
•  Turn on the player again.
No picture on the LCD 
monitor.
•  “Video out” is not set to “Off”.
• If “Video out” is not set to “Off”, the LCD of the player turns off.
  Powering the player on always sets it to “Off”. Turn the player off then
  power it on.
No picture. (Other than 
built-in LCD monitor)
•  The connected TV is not set to receive 
DVD signal output.
• Select the appropriate video input mode on the TV so the picture from 
the player appears on the TV screen.
No sound.
•   The equipment connected via the 
audio/video cable is not set to receive 
DVD signal output.
•  Select the correct input mode of the audio receiver so you can listen 
to the sound from the player.
•  The volume is too low.
• Adjust the volume by turning the volume control.
•  The audio receiver or TV is turned off.
•  Turn on the equipment connected with the audio/video cable.
•   The setting of output sound format is    
 incorrect.
• Select the proper audio setting.
 The playback picture has 
occasional distortion.
•  The disc is dirty.
• Eject the disc and clean it.
•  Player is in fast forward or fast reverse 
mode.
•  Sometimes a small amount of picture distortion may appear. This is 
not a malfunction.
•  The player was moved or given a 
 shock.
•  Vibrating or shaking the player during playback may produce 
distortion. This is not a malfunction. If not restored to usual status, 
stop playback and start again.
•  The disc is not set fi rmly.
•  Remove the disc and set it again.
Brightness is unstable or 
noises are present in the 
playback pictures. (Other 
than built-in LCD monitor)
•  The effect of copy protection. If you 
connect the player to a VTR, TV/VTR 
combination or video selector, the 
playback picture may be distorted as 
DVD video discs are copy protected.
•  Connect the player directly to the TV. Avoid connecting the player to a 
VTR or TV/VTR combination.
Check the following guide for the possible cause of a problem before contacting service.
SD-P2900SR-E_P55-80.indd   75
07.5.22   11:33:08 AM