American Dryer Corp. WDA-385 用户手册

C. Sail Switch Assembly

The sail switch is a heat circuit safety device which controls the heat circuit ONLY. When the dryer is

operating and there is proper air flow the sail switch damper pulls in and closes the sail switch.

Providing all the other heat-related circuits are functioning properly. If an improper air flow occurs, the

sail switch damper will release, and the circuit will open.

IMPORTANT: UNDER NO CIRCUMSTANCES SHOULD HEAT CIRCUIT SAFETY

DEVICES EVER BE DISABLED.

To Replace Sail Switch

1. Discontinue power to dryer.

2. Remove the two (2) screws which hold the sail switch box.

3. Disconnect the two (2) wires from the switch.

4. Disassemble sail switch from mounting bracket by removing the two (2) screws securing the switch in

place.

5. Reverse this procedure for installing new sail switch. Adjust sail switch as described in the next section.