Smeg 129316 用户手册

129316

Interferences from the ambient (for example 
electrical wiring) could induce signalization of 
different faults. In such cases:
-  switch the appliance off, and wait for a few 

seconds;

-  plug in the appliance and repeat the drying 

program.

If the fault repeats, call authorized service shop.

Warranty shall not apply in case of failures due to 
interferences from the environment (lightning stroke, 
power supply circuit faults, natural disasters).

19

•  If there is current in the socket and if the fuse is 

functioning.

•  If the plug is correctly inserted into the socket.

•  If the door is closed tightly (press it towards the 

appliance).

•  If the program runs according to instructions.
•  If the container is full (only with condensation 

dryer), 

•  If appropriate drying time is selected.

• If the fi lter is clean.
•  If the condensation device is clean (only with 

condensation dryer).

•  If the room is adequately ventilated.
•  If the amount of laundry to be dried is not too big.
•  If the evacuation tube is too long (only with 

evacuation dryer - max 2 m).

•  If the laundry loaded in the drum has not been 

spun enough or if appropriate drying time has been 
set.

•  If the room is too hot (over 25°C, applies for 

condensation dryer).

•  If the room temperature is too high.
•  If the condensation device is clean.