Ferris Industries 5901011 用户手册
16
www.ferrisindustries.com
Deck Lift Pedal
The deck lift pedal can be depressed during operation
to briefly raise the mower deck while mowing around
obstacles.
to briefly raise the mower deck while mowing around
obstacles.
Parking Brake
DISENGAGE
Releases the parking
brake.
ENGAGE
Locks the parking brake.
Pull the parking brake lever back to engage the
parking brake. Move the lever fully forward to
disengage the parking brake. NOTE: To start the unit
the parking brake must be engaged.
parking brake. Move the lever fully forward to
disengage the parking brake. NOTE: To start the unit
the parking brake must be engaged.
Fuel Tank Cap
To remove the cap, turn counterclockwise.
Features & Controls
Ground Speed Levers
These levers control the ground speed of the rider.
The left lever controls the left rear drive wheel and
the right controls the right rear drive wheel.
The left lever controls the left rear drive wheel and
the right controls the right rear drive wheel.
Moving a lever forward increases the FORWARD
speed of the associated wheel, and pulling back on a
lever increases the REVERSE speed.
speed of the associated wheel, and pulling back on a
lever increases the REVERSE speed.
Note: The further a lever is moved away from the
neutral position the faster the drive wheel will turn.
neutral position the faster the drive wheel will turn.
See the Operating the Zero Turn Rider section for
steering instructions.
steering instructions.
Seat Adjustment Lever
The seat can be adjusted forward and back. Move
the lever forward, position the seat as desired, and
release the lever to lock the seat in position.
the lever forward, position the seat as desired, and
release the lever to lock the seat in position.
Figure 1. CONTROL FUNCTIONS
The information below briefly describes the function of the individual controls. Starting, stopping, driving, and
mowing require the combined use of several controls applied in specific sequences. To learn what combination
and sequence of controls to use for various tasks see the OPERATION section.
The information below briefly describes the function of the individual controls. Starting, stopping, driving, and
mowing require the combined use of several controls applied in specific sequences. To learn what combination
and sequence of controls to use for various tasks see the OPERATION section.
FEATURES AND CONTROLS
Not
for
Reproduction