Fairchild CAM/CCD-4KCL.TDI 用户手册

 

 

The Fairchild Imaging Osprey camera uses TDI technology in a CCD base, and as 
all such devices, has some limited inherent susceptibility to electrostatic discharge 
(ESD). 
All reasonable and customary design steps have been taken to provide ESD 
protection circuitry.  
Electrostatic charge placed at the sensor could cause charging of the chip which in 
some situations might not be readily dissipated and minor impact on performance 
might be temporarily experienced. Therefore, do not insert your finger or any other 
object into the lens mount barrel. 
  

•  Please be certain to ground yourself prior to handing the camera.  

•  Ensure that your working environment is grounded, including conductive floor 

mats.  

•  Do not touch the window of the imager. 
 

•  Be certain to avoid dust buildup on the sensor window, where it could block the 

optical path.  

•  By not touching the surface of the sensor, you avoid introducing oil and avoid 

scratching the sensor window. Again, you should not insert anything into the 
lens mount barrel. 

 

•  Use compressed air to blow off particulate.  

 

•  If for some reason cleaning of the sensor window is required, use lens wiping 

cloth with a small amount of eyeglass cleaning fluid. Do not use solvent as it 
may smear the sensor window. 

Fairchild Imaging • CAM/CCD 2KCL.TDI & CAM/CCD-4KCL.TDI Line Scan Camera User’s Manual • Rev C• 26 of 30