Samsung SC-X105L/X110L 用户手册

It is recommended you purchase one or more additional battery packs to allow continuous use of your CAM.

Slide the battery pack into the groove until it clicks.

Pull the [Battery Eject] button to eject the battery pack.

✤

Clean the terminals to remove foreign substances before inserting the battery pack.

✤

If the CAM will not be in use for a while, remove the battery pack from the CAM.

Note

✤

Properly dispose of the expired batteries. Contact your local government or 
community disposal service for disposal practices in your area. Keep them away from 
small children.

✤

Do not mix old and new batteries. When replacing the batteries, replace them both.

✤

If the External Camera Module will not be in use for a while, remove the batteries.

✤

Do not insert a foreign material or electric conducting material in the battery compartment. It can cause device failure.

✤

Do not open the battery cover with an excessive force. The connected cable may become disconnected.

Notes

SB-P90A (900mAh) 

SB-P180A (1800mAh) (option)

<Insert>

<Eject>

1.

Open the battery cover by turning the lid to align the BATT. open mark (

) and 

mark ( 

▲ ) on the cover.

2.

Install two AAA size batteries. Make sure to match the “+” and “-” ends of the 
batteries with the diagram inside the compartment.

3.

Close the battery cover by turning the cover in reversed direction of step 1.

1

2

3