Toshiba CTX28 用户手册

Installing the CTX100 Cabinet

1. Loosen the screws from the front cover to remove it.

2. Loosen the four screws from the top cover and slide it off.

3. Loosen the four screws from each side cover and pull the 

covers forward to remove them.

1. Remove and save the two screws from the back of the Base Unit.

2. Slide the metal cover about a half inch to the right (it will drop down and forward) to remove it.

3. If you are installing an Expansion Cabinet, remove one screw from the back of the Expansion 

Cabinet. Slide the metal cover to the right to remove it.

The figure below show the position of the screws. Back covers should be removed before 
the Base and Expansion cabinets are attached to each other.

6074