3M 8800 Series 用户手册
Resetting the patron counter
To keep track of the total count, record the number
on the patron counter before resetting the
detection system.
on the patron counter before resetting the
detection system.
To reset the patron counter:
1
Locate the reset button access hole on the outside
of Panel A.
of Panel A.
2
Straighten a small paperclip.
3
Gently push the paperclip
straight into the access
hole approximately 1 in. (2.5 cm) until the reset
button clicks, and then remove the paperclip.
button clicks, and then remove the paperclip.
There is a guide within the access hole that
directs the paperclip to the reset button.
directs the paperclip to the reset button.
4
Confirm that the patron counter is reset to zero.
If the software version is displayed, press the
reset button twice in succession to clear the
screen.
reset button twice in succession to clear the
screen.
Panel A
Access Hole
8800_OM_003
Figure 3. Locate reset button access hole.
Figure 4. Press reset button with paperclip.
9