Bosch NBN-733 用户手册

en | Setting up VCA

Camera Browser Interface

AM18-Q0635 | v5.6 | 2013.01

Software manual

Bosch Security Systems

The debounce time prevents very brief alarm events from 

triggering individual alarms. If the Debounce time 1 s option is 

activated, an alarm event must last at least 1 second to trigger 

an alarm.

Select the areas of the image to be monitored by the motion 

detector. The video image is subdivided into square sensor 

fields. Activate or deactivate each of these fields individually. To 

exclude particular regions of the camera's field of view from 

monitoring due to continuous movement (by a tree in the wind, 

for example), the relevant fields can be deactivated.

1.

Click Select Area to configure the sensor fields. A new 

window opens.

2.

If necessary, click Clear All first to clear the current 

selection (fields marked red).

3.

Left-click the fields to be activated. Activated fields are 

marked red.

4.

If necessary, click Select All to select the entire video- 

frame for monitoring.

5.

Right-click any fields to deactivate.

6.

Click OK to save the configuration.

7.

Click the close button (X) in the window title bar to close 

the window without saving the changes.

Detect tampering of cameras and video cables by means of 

various options. Run a series of tests at different times of the 

day and night to ensure that the video sensor is operating as 

intended.

Sensitivity and Trigger delay [s] can only be changed if 

Reference check is selected.

The basic sensitivity of the tamper detection can be adjusted 

for the environmental conditions to which the camera is 

subject. The algorithm reacts to the differences between the