Bosch NBN-733 用户手册

Camera Browser Interface

Network | en 101

Bosch Security Systems

Software manual

AM18-Q0635 | v5.6 | 2013.01

To limit browser access to encrypted connections, choose an 

HTTPS port from the list. The standard HTTPS port is 443. 

Select the Off option to deactivate HTTPS ports and limit 

connections to unencrypted ports.

The camera uses the TLS 1.0 protocol. Ensure that the browser 

has been configured to support this protocol. Also ensure that 

Java application support is activated (in the Java Plug-in 

Control Panel of the Windows Control Panel).

To limit connections to SSL encryption, set the Off option in 

the HTTP browser port, the RCP+ port, and Telnet support. This 

deactivates all unencrypted connections allowing connections 

on the HTTPS port only.

Configure and activate encryption for media data (video, audio, 

metadata) on the Encryption page.

Activating RCP+ port 1756 allows unencrypted connections on 

this port. To allow only encrypted connections, set the Off 

option to deactivate the port.

Activating Telenet support allows unencrypted connections on 

this port. To allow only encrypted connections, set the Off 

option to deactivate telnet support, making telnet connections 

impossible.

If necessary, select the Ethernet link type for interface ETH. 

Depending on the network equipment connected (for example, 

a switch), it may be necessary to select a special operation 

type.

Set the maximum segment size for the IP packet's user data 

here. This gives the option to adjust the size of the data packets 

to the network environment and to optimize data transmission. 

In UDP mode, comply with the MTU value set below.