Bosch F.01U.278.516 用户手册
Relay Unit
Safety instructions | en
5
Bosch Security Systems
User Manual
F.01U.278.516 | V1.0 | 2012.11
1
Safety instructions
1.1
Importance of safety instructions
Each safety and protection instruction in this manual must be adhered to in order to avoid
personnel injuries, property damages or environmental pollution.
In a similar manner, the legal bylaws, the measures in prevention of accidents and for the
protection of the environment, as well as the recognized technical rules aiming at appropriate
and safe working conditions which as applied in the country and at the place of use of the
Relay Unit must be adhered to.
1.2
Disregarding safety rules
Disregarding the safety rules, as well as existing legal and technical regulations, may lead to
accidents, to property damages or to environmental pollution.
1.3
Environmental conditions
Install the Relay Unit in a dry place, away from any source of heat.
1.4
General safety instructions
NOTICE!
The user and installer should read and understand this chapter before any intervention on the
Relay Unit.
NOTICE!
The Relay Unit must not be located near a water tap or any other source of water.
The electrical safety of the unit is only guaranteed if the electrical installation is conform to
the national regulation and if this installation works properly.
The Relay Unit may not be used in buildings prone to fire and explosion hazards.
NOTICE!
The Relay Unit may not be used under exposure to the direct sunlight, to heat, to dust or to an
excessive humidity (only use the equipment in a clean environment).
CAUTION!
Interferences
Avoid immediate proximity to other electric devices such as a television.
DANGER!
Electrocution
During maintenance operations, when the Relay Unit is powered and its casing is removed, it
may not be left unattended.
CAUTION!
The Relay Unit may only be connected to the electrical sources as described in