Monte Carlo Fan Company 5ALR56 用户手册

Tighten the 2 Set screws on the Yoke

once the downrod is in place.

Insert downrod into yoke on top of

the Fan Body.  Align the hole in the

Downrod with the hole in the Yoke.

Insert the Pin through the Yoke and

Downrod until the point appears on

the other side.  Install the Keeper Pin

Install Canopy Cover, Cage Assembly

and Yoke cover onto the Downrod.

Next thread the fan leadwire from

top of fan through the downrod.

Install upper glass to top of fan.  

Install tines of upper cage by inserting

into the 4 slots on the hub.  Tighten

using Phillips screwdriver.  Repeat 3

more times until all 4 tines are in place.

Place the Main holder over the blade

and install 3 screws and tighten

securely.  Repeat this process again

for each blade

Install Blade / blade holder assembly

to fan motor using large motor

screws.  Repeat this process 4 more

times until all blades are installed to

the fan.

Install 3 each Max 25 Watt cande-

labra base bulbs into the sockets on

top of the fan as shown.

Place Floating decorative holder onto

blade.  The tabs should align with

the holes in the blade.  

Slide the Yoke Cover, and cage down on the fan

body.  The Cage should engage 4 slots in the

upper glass.  Tighten the Set Screw in on the

top of the Cage.  This will prevent any rattling.

Lift mounting neck to mounting Plate and align

screws. 

Secure mounting neck to the mounting plate

with four screws to become a complete mount-

ing bracket.