Essick Air 3D6 100 用户手册

下载
页码 20
 
 
WATER CAP
 
Figure B: Water Bottle Filling
3)  Make sure wicks are resting all the way into the water channel as indicated 
by the illustrations. 
4)  Return each bottle to its upright position using the handle on the top of the 
bottle.  Set each bottle in its recessed area, the top of the bottle flush with 
the top of the humidifier.  When positioned properly, the valve will open and 
water will flow into the water channel. 
5)  We recommend using Essick Air Bacteriostat Treatment, P/N 1970 
whenever you refill the humidifier reservoir to eliminate bacterial growth.  
Add bacteriostat according to the instructions on the bottle. 
6)  Plug cord into wall receptacle and turn humidifier on. 
 **When 
excessive condensation exists, a lower speed setting is    
  recommended. 
CAUTION: Disconnect power before filling, cleaning or servicing unit. Keep 
grille dry at all times. 
OPERATION & CONTROLS 
The humidifier should be placed at least FOUR inches away from any walls and 
away from heat registers.  Do not place on soft carpet.  Unrestricted airflow into 
the unit will result in the best efficiency and performance. 
Figure A : 3D6 100 Assembly and Wick Placement