Hunter Fan 53114 用户手册

www.HunterFan.com

1.888.830.1326

M0069-01 • 04/30/13 • © Hunter Fan Company

•  Make sure the wattage of the 

light bulbs installed matches 
the specifications on the light 
sockets.

•  Make sure power switch is on.

•  Pull the pull chain to make sure it 

is on.

•  Push the motor reversing switch 

firmly left or right to ensure that it 
is engaged.

•  Check the circuit breaker to 

ensure the power is turned on.

•  Make sure the blades spin freely.

•  Turn off power from the circuit 

breaker, then loosen the canopy 
and check all the connections 
according to the wiring diagram 
on page 10.

•  Make sure the battery is working.

•  Check the plug connection in the 

switch housing.

•  Tighten all of the blade and 

blade iron screws until they 
are snug.

•  Turn the power off, support 

the fan carefully, and check 
that the hanger ball is properly 
seated.

•  Use the provided balancing 

kit and instructions to balance 
the fan.

•  Make sure the battery is 

installed correctly.

•  Install a fresh battery. 

•   Change battery.

•  Tighten the blade and blade iron 

screws until they are snug.

•  Check to see if any of the blades 

are cracked. If so, replace all of 
the blades.

•  Turn the power to the fan off at 

the wall switch. Then, turn it on 
again. Push the 3 button on the 
remote transmitter for high fan 
speed. Then, pull the fan speed 
chain until the fan is on the 
highest speed.