SPX Cooling Technologies 98-1514E 用户手册
4
Preparation
Those are only some of the safety issues that may arise in the design
process. SPX strongly recommends that you consult a safety engineer
to be sure that all safety considerations have been addressed.
process. SPX strongly recommends that you consult a safety engineer
to be sure that all safety considerations have been addressed.
Several options are available that may assist you in addressing some of
these personnel safety concerns, including:
these personnel safety concerns, including:
— distribution basin access platform with ladder and handrail
— ladder extensions for distribution basin platform ladders (used where
the base of the tower is elevated)
— safety cages for distribution basin platform ladders
— mechanical equipment access platform and ladder
— fan cylinder extensions
— flow control valve
Tower Location
Space available around the tower should be as generous as possible to
promote ease of maintenance—and to permit freedom of airflow into and
through the tower. If you have questions about the adequacy of the avail-
able space and the intended configuration of the tower, please contact
your Marley sales representative for guidance.
promote ease of maintenance—and to permit freedom of airflow into and
through the tower. If you have questions about the adequacy of the avail-
able space and the intended configuration of the tower, please contact
your Marley sales representative for guidance.
Prepare a stable, level support foundation for the tower, utilizing weight,
wind load, and dimensional information appearing on appropriate Marley
submittal drawings. Supports must be level to insure proper operation of
the tower.
wind load, and dimensional information appearing on appropriate Marley
submittal drawings. Supports must be level to insure proper operation of
the tower.
The cooling tower must be located at such distance and direction to
avoid the possibility of contaminated tower discharge air being drawn
into building fresh air intake ducts. The purchaser should obtain the
services of a Licensed Professional Engineer or Registered Architect
to certify that the location of the tower is in compliance with appli-
cable air pollution, fire, and clean air codes.
avoid the possibility of contaminated tower discharge air being drawn
into building fresh air intake ducts. The purchaser should obtain the
services of a Licensed Professional Engineer or Registered Architect
to certify that the location of the tower is in compliance with appli-
cable air pollution, fire, and clean air codes.
Warning
Note