Emerson Process Management 3422 用户手册
Reference, Installation, and Operations Manual
Section 5: Startup and meter configuration
3-9000-743 Rev S
June 2013
Meter Archive Logs (Logs/Reports Menu)
179
At least two Maintenance logs or one Trend file must be added to the Workbooks to trend list
before the Trend button becomes enabled. Click Trend to open a Save As dialog box to allow you
to choose a name for the Trend file. A default name that consists of the Meter Name of the first
file selected to trend followed by “trend” and ending with the PC’s date and time is suggested.
before the Trend button becomes enabled. Click Trend to open a Save As dialog box to allow you
to choose a name for the Trend file. A default name that consists of the Meter Name of the first
file selected to trend followed by “trend” and ending with the PC’s date and time is suggested.
Make changes as desired and also include a Comment to include in the trend file. Clicking Save
will start the Trend file creation. When the Trend file is finished, a prompt stating Log complete
in “C:\Ultrasonic Data\<Meter Name>\<Meter Name> trend <Date> <Time>.xls”. Open? Click
will start the Trend file creation. When the Trend file is finished, a prompt stating Log complete
in “C:\Ultrasonic Data\<Meter Name>\<Meter Name> trend <Date> <Time>.xls”. Open? Click
YES
to close the prompt and open the Excel® file. Click
NO
to close the prompt but not open the
Excel® file at this time.
The Microsoft® Excel® Trend file contains two worksheets. The following is a brief description
of each.
of each.
Charts
Contains charts of the data collected and stored on the Raw Data worksheet. This worksheet is
laid out to print one chart per page on a standard 8 ½ x 11 sheet of paper. Click here for
information on customizing this worksheet.
laid out to print one chart per page on a standard 8 ½ x 11 sheet of paper. Click here for
information on customizing this worksheet.
Raw Data
This worksheet contains the Averages row from Maintenance Log Raw Data worksheets and the
rows or data from a Trend file Raw Data worksheet. Only the Technician level data values are
included in a Trend file. The rows are sorted from oldest to newest. The first column in each row
contains the filename of the Maintenance log the data comes from followed by the date and
time columns for when the Maintenance log was created.
rows or data from a Trend file Raw Data worksheet. Only the Technician level data values are
included in a Trend file. The rows are sorted from oldest to newest. The first column in each row
contains the filename of the Maintenance log the data comes from followed by the date and
time columns for when the Maintenance log was created.
5.10.1
Meter Archive Logs (Logs/Reports Menu)
The Meter Archive Logs dialog box allows you to collect historical log information from an
ultrasonic meter. This dialog box is only available while connected to a meter. If connected to a
Daniel Mark III Gas Ultrasonic meter, a valid LogAccessKey may be required before logs can be
collected. See the Key Manager for more information on enabling keys.
ultrasonic meter. This dialog box is only available while connected to a meter. If connected to a
Daniel Mark III Gas Ultrasonic meter, a valid LogAccessKey may be required before logs can be
collected. See the Key Manager for more information on enabling keys.
If the first file selected to trend does not have a standard filename starting with either
<Meter Name> maintenance log... or <Meter Name> trend... then the default filename
suggested will be just “trend <Date> <Time>.xls”.
<Meter Name> maintenance log... or <Meter Name> trend... then the default filename
suggested will be just “trend <Date> <Time>.xls”.