Regency B36X 用户手册

下载
页码 64
30
Regency Bellavista™ B36X  Gas Fireplace
INSTALLATION
VERTICAL TERMINATION 
WITH CO-LINEAR FLEX SYSTEM
THE APPLIANCE MUST NOT BE 
CONNECTED TO A CHIMNEY FLUE 
SERVING A SEPARATE SOLID FUEL
BURNING APPLIANCE.
This appliance is designed to be attached to 
two 3" (76mm) co-linear aluminium fl ex running 
the full length of the chimney. See the Venting 
Arrangements on next page for minimum and 
maximum heights.
Masonry chimneys may take various contours which the fl exible liner will accommodate. However, 
keep the fl exible liner as straight as possible, avoid unnecessary bending.
The Air Intake pipe must be attached to the inlet air collar of the termination cap.
Required Parts:
Part # 
Description
946-529 
Co-linear DV Vertical 
 Termination 
Cap
948-305 
3" Flex - 35 ft.
946-563 
Co-Axial to Co-Linear Adapter Kit
 
which contains the following: 
 
Co-linear Flex Adapter  
 
 Outer 
Pipe
 Inner 
Pipe 
Adapter 
770-994 Rigid 
Pipe 
Adaptor
946-606       Vent Reducer
Alternate Approved Caps
46dva-VC    Vertical Termination Cap
46dva-VCH  High Wind Cap
46dva-GK       3" Co-linear Adapter with fl ashing
Flex Liner
Exhaust
Flue
A maximum
of two certified
joiner kits
may be used
per length.
#948-305 (35 ft)
Air Intake
Co-linear DV
Vertical Termination
Cap # 946-529
Co-Linear
Flex
Adapter
with Kit#
946-563
Outer
Pipe
with Kit#
946-563
Inner Pipe
Adapter
with Kit#
946-563
Rigid Pipe Adapter
# 770-994
90 Degree
Elbow
Pipe Length
Reducer #946-606
(4 x 6-5/8 venting)
NOTE:  
    
See detailed venting arrangements,
    vertical terminations, co-linear fl ex system 
into masonary fi replaces in this manual.