Hearth & Home Technologies TOPAZ-D-CWL 用户手册

September 1, 2008

Page  23

Quadra-Fire · Topaz · 7009-113G

Before making gas connections ensure that the appliance 
being installed is compatible with the available gas type.

Any natural or propane gas conversions necessary to meet 
the appliance and locality needs must be made by a quali-
fied technician using Hearth & Home Technologies specified 
and approved parts.

   Disconnect power and turn off gas supply if 

installed.  Remove front, glass, and logs if installed. Loosen 
the shutter adjustment nut (located underneath the appli-
ance) with a 7/16 in. wrench. Slide the shutter to the left 
(open position).

   Burner removal: Remove burner by first remov-

ing the two screws indicated and lifting the burner out.

   Remove the three screws on the front of the burner 

support. Set screws aside.

   Remove the main burner orifice using a 5/8 in. 

wrench and replace the orifice with the proper size as indi-
cated below for your gas type and venting.

TOOLS REQUIRED:  Power drill (a 90° handle is helpful); #2 
Phillips bit; 5/32 in. Allen wrench; 5/8 in. open end wrench.

KIT CONTENTS:  Replacement orifice; replacement pilot 
injector; and valve regulator.

Opens Left

Closes Right

 Burner Screws

3 screws

   Slide the burner support to the left to access the 

orifice.