Hearth & Home Technologies GBI25 用户手册

02-02

26678 Rev H

GBI25 SERIES B-VENT GAS FIRED FIREPLACE INSERT

7) DO NOT PACK INSULATION INSIDE THE

SURROUND.

8) Remove the switch from wire assembly and

feed wire through the brass trim. See

Figure 15. Re-install the switch to the wires

and push into place. See Figure 16.

WARNING!

ELECTRICAL GROUNDING INSTRUCTIONS

This appliance is equipped with a three-prong

(grounding) plug for your protection against shock

hazard and should be plugged directly into a prop-

erly grounded three-prong receptacle. Do not cut or

remove the grounding prong from this plug.

Figure 11 - Installation of Hood

Figure 12 - Assemble Brass Trim

Figure 13 - Installation of Surround Hood

Figure 14 - Installation of Surround Hood

Figure 15 - Installation of ON/OFF Switch

Figure 16 - ON/OFF Switch in Surround Installed

Important:

Remove all shipping material, fingerprints

and smudges from the brass trim prior to burning the

appliance. If this is not done, they will be burned into

the trim.