Hearth & Home Technologies 5100I-NL-B 用户手册

Page 1

R 

438-0380D

September 1, 2008

UL 1777 Insulated Stainless Steel 

Liner or Other Approved Lining System 

Follow Manufacturer’s Instructions 

on Insulation and Support 

For Zero or Other Non-Code Clearances, 

Follow Approved Liner Manufacturer’s Specific 

Insulation Requirements:  Different Clearances 

May Require Different Specifications 

Masonry Chimney Must 

Have Structural Integrity 

UL 1777 Insulated Stainless Steel 

Liner or Other Approved Lining System 

Minimum 8 in. (203mm) Masonry 

Thickness in Front of Smoke Chamber

Damper Plate Removed or 

Fastened in Open Position 

Seal with Non-Combustible Material 

Minimum Clearance in Accordance 

with Insert Listing 

Floor Protection in 

Accordance with Insert 

Listing 

Follow Manufacturer’s 

Instructions for Maximum 

Liner Extension Above 

Chimney 

Maximum 30

 

Degrees 

Offset in Chimney 

Combustible Floor 

The Quadra-Fire 5100-I Insert conforms with the UL 18 

and ULC S68 (Canada) in all respects, and is approved to 

UL & ULC safety standards for installation and use within a 

fireplace with a masonry chimney in accordance with NFPA 

211.
In the USA all masonry fireplace installations require a stain-

less steel liner connector pipe extending to the first flue liner 

of the existing code approved masonry chimney. In Canada,

a full reline is required.

NOTE:    In  Canada,  the  chimney  liner  must  conform  to

the  Class    requirements  of  CAN/ULC-S65,  Standard 

for Lining Systems for Existing Masonry or Factory-Built 

Chimneys  and  Vents,  or  CAN/ULC-S60,  Standard  for 

Lining Systems for New Masonry Chimneys.

  Installation into fireplaces without a permit will 

void the listing.