FMI DHS-36 用户手册

120114-01C

3

IMPORTANT: Installation of brick should 

be done before wood nook is placed in a 

permanent location. Top panel and front face 

must be removed prior to installing bricks 

(see Figure 2). Bricks are packaged in three 

separate boxes. These boxes are labeled by 

sections of firebox.
HDS-36

Box # 1 - Left and Right Panel
Box # 2 - Bottom Panel
Box # 5 - Rear Panel
DHS-42

Box # 1 - Left and Right Panel
Box # 3 - Bottom Panel
Box # 6 - Rear Panel
DHS-50

Box # 1 - Left and Right Panel
Box # 4 - Bottom Panel
Box # 7 - Rear Panel

Flanges

Brick

Top Panel

Front Face

Stamped Letter 

Location

Brick 

Housing

Each brick housing is stamped with a letter (full 

size bricks are not stamped). These will help 

identify brick when installing. It is important 

to install these bricks exactly as instructed.

Install bricks one section at a time starting with 

hearth (bottom) panel followed by rear panel 

and lastly sides panel (see Figure 3, Figure 

4, page 4, or Figure 5, page 5, depending on 

your model). It is important to install bricks in 

this sequence.

Press Brick firmly into brick housing until it 

snaps. Groove line on side of brick will come 

in contact with flange on brick housing. This 

secures brick into housing (see Figure 3).