Philips 32" 100Hz Digital Scan Widescreen TV 32PW9520 业主指南
产品代码
32PW9520
8
Source
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
you connected to one of the external inputs.
&
Press the cursor right to enter the list of types
of peripherals attached to the selected input.
of peripherals attached to the selected input.
é
Select the peripheral device with the cursor
up/down.
up/down.
Once you have selected the source type, e.g. DVD,
this source will automatically be selected when
your remote control is in DVD mode, see p. 3, and
when you press the v key on the remote
control.
this source will automatically be selected when
your remote control is in DVD mode, see p. 3, and
when you press the v key on the remote
control.
Auto Surround
Sometimes the broadcaster transmits special
signals for Surround Sound encoded
programmes.The TV automatically switches to
the best surround sound mode when
signals for Surround Sound encoded
programmes.The TV automatically switches to
the best surround sound mode when
Auto
Surround
is switched
On
.
Set/Change code
The Child lock feature (see TV, Features, p. 11)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
&
Select
Set/Change code
.
é
If no code exists yet, the menu item is set to
Set code.
If a code has previously been entered, the menu
item is set to
Set code.
If a code has previously been entered, the menu
item is set to
Change code
. Follow the
instructions on screen.
Important:You have forgotten your code !
&
Select
Change code
in the General menu and
press
OK
.
é
Press the cursor right and enter the overriding
code 8-8-8-8.
code 8-8-8-8.
“
Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
personal 4-digit code.The previous code is
erased and the new code is stored.
If a decoder or a descrambler is connected, see
p. 15, you can define one or more programme
numbers as decoder programme numbers.
p. 15, you can define one or more programme
numbers as decoder programme numbers.
&
Select
Decoder
with the cursor right.
é
Select
Programme
.
“
Select the programme number under which
you have stored the programme coming from
your decoder.
you have stored the programme coming from
your decoder.
‘
Select
Status
.
• Select the input used to connect your
decoder:
None
,
EXT1
or
EXT2
.
• Select
None
if you do not want the selected
programme number being activated as a
decoder programme number.
decoder programme number.
Note: Select
EXT2
when the decoder is connected
to your EasyLink video recorder.
Decoder
Decoder
Programme
Status
Status
Setup
Source
EXT1
EXT2
EXT3
SIDE
EXT2
EXT3
SIDE
Setup