Samsung AH68-02259Q 用户手册

下载
页码 42
English
 
35
05
Advanced Functions
USB Function
Playing Media Files using the 
USB Host Feature
You can enjoy media fi les such as pictures, movies 
and music saved on an MP3 player, USB memory 
stick or digital camera in high quality video with 5.1 
channel sound by connecting the storage device to 
the USB port of the product.
Connect the USB device to the USB port on the 
front panel of the product.
Press the FUNCTION button to select USB.
USB appears on the display screen and then 
disappears.
Press the ◄► buttons to select Videos, Music 
or Photo.
- Select a fi le to play.
Safe USB Removal
To prevent damage to the memory stored in the 
USB device, perform safe removal before 
disconnecting the USB cable.
Press the YELLOW(C) button.
-  REMOVE will appear on the display.
Remove the USB cable.
NOTE
To listen to your music fi les with 5.1 channel 
sound, you must set the Dolby Pro Logic II 
mode to Matrix. (See page 33)
Remove the USB cable from the USB port 
slowly. Otherwise, it may cause damage to the 
USB port.
1.
2.
3.
Advanced Functions
CD Ripping
B
Converts audio sound of the CD into a MP3 fi le 
format before sending to a USB storage device.
Connect the USB device to your product.
Insert the audio CD into the CD tray.
Press the CD RIPPING button.
To start ripping the current track, 
press the CD RIPPING button on 
the remote control while the system 
is playing a track or stopped temporarily.
To rip the entire CD, press and hold the CD 
RIPPING button on the remote control.
 -"FULL CD RIPPING" appears on the display 
and ripping starts.
Press the STOP () button to stop ripping.
When the CD ripping is done, a directory 
named "RIPPING" will be created in the USB 
device and the ripped fi le will be saved in a 
format of "SAM-XXXX”.MP3".
NOTE
  Do not disconnect the USB connection or the power cable 
during the CD ripping. Otherwise, it may cause damage to the 
data. To stop CD ripping, press the STOP button and 
disconnect the USB device after the system stops playing the 
CD completely.
If you disconnect the USB connection during the CD ripping, 
the system will turn off and you will not be able to delete the 
ripped fi le.
If you connect the USB device to the system while it is playing 
a CD, the system stops temporarily and will play again.
DTS-CDs cannot be ripped.
If the ripping duration is less than 5 seconds, a ripping fi le may 
not be created.
CD ripping works only if the USB device or the HDD is 
formatted in the FAT fi le system. (The NTFS fi le system is not 
supported.) 
For a list of compliant devices, refer to the specifi cation of the 
USB host.
The ripping is performed at a normal speed of x3. The ripping 
time may be longer with some USB devices.
While the system is ripping a CD, the audio sound will not be 
output.
Do not put touch or move the system while it is ripping a CD.
1.
2.
3.
4.
D
CD RIPPING
HT-C463-XAC_ENG-0304.indd   35
HT-C463-XAC_ENG-0304.indd   35
2010-03-04     9:21:05
2010-03-04     9:21:05