Runco RS-900 Series RS1100 Series 用户指南

To install the fixed CineWide base plate on an RS-900/CineWide, RS1100/CineWide or 
RS1100 Ultra/CineWide with a prismatic anamorphic lens:

1.

Place the projector upside down on a blanket or other soft surface. 

2.

For a standard RS-900/CineWide or RS1100/CineWide that is to be 
ceiling-mounted: Line up the four holes on the projector ceiling mounting plate 
(included with the projector ceiling mount kit) with those on the bottom of the 
projector. 

3.

Line up the two mounting holes on the CineWide base plate with those on the bottom 
of the projector (and at the front of the ceiling mount plate, if present).

4.

Secure the CineWide base plate (and ceiling mounting plate, if needed) to the 
projector with the M6x12mm screws and washers provided with the CineWide lens 
base plate. See Figure 3-10.

 

➤