Philips SC-BT735 用户手册

VQT2Q52

A Speaker cable sticker (included)
B Connector

Be sure to match the number on each sticker with the 
connector colour.

≥ Be careful not to cross (short-circuit) or reverse the polarity of the 

≥ Don’t use a front speaker as a surround speaker or vice versa. Verify 

≥ To avoid injury by falling or dropping the speaker, place the speaker cables 

with care not to stumble or hook.

≥ Do not hold the speaker in one hand to avoid injury by dropping the 

speaker when carrying.

[BT330]

[BT735] [BT330]

∫ Preventing the speakers from falling

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that 

may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10 kg.
e.g., [BT735]

A String (not included)

Thread from the wall to the speaker and tie tightly.

B Rear of the speaker
C Screw eye (not included)
D Wall
E Approx.150 mm

1 FRONT (L)

WHITE

2 FRONT (R)

RED

3 SURROUND (L)

BLUE

4 SURROUND (R)

GREY

5 CENTRE

GREEN

6 SUBWOOFER

PURPLE

FRONT

Lch









Use of the speaker cable stickers is convenient 
when making cable connections.

e.g. Front speaker (L)

Push!

r: White
s: Blue line

Connecting the speaker cables. Insert the wire fully, 
taking care not to insert beyond the wire insulation.
e.g. Surround speaker [BT230]

Speaker assembly option

Leave about 120 mm

You can remove and use the cable from 
the stand. To reattach the cable, refer to 
page 42.

Insert the wire fully.
r: White
s: Blue line

Push!

Press into the groove.

Tighten securely.

Slide into the 
groove.











SCBT735_330_230EBEPEG_VQT2Q52-B.book  13 ページ  ２０１０年２月９日　火曜日　午前１０時５１分