Philips SC-BT735 用户手册
Getting s
tar
te
d
21
VQT2Q52
Network Easy Setting (Connection Test)
Network Easy Setting (Internet Connection Test)
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in
≥ You can perform this setup anytime by selecting “Network Easy Setting” in
the Setup menu. (> 40)
≥ You can redo these settings individually using “Network Settings”. (> 40)
≥ Do not connect to a wireless network for which you do not have usage
≥ Do not connect to a wireless network for which you do not have usage
rights. Wireless networks for which you do not have usage rights (SSID
*
2
)
may appear during the automatic search for a wireless network
environment. However, if you connect, there is a risk that it will be regarded
as illegal access.
environment. However, if you connect, there is a risk that it will be regarded
as illegal access.
≥ After performing network settings on this unit, the settings (encryption level,
etc.) of the Wireless router (Access point) might change. When you have
trouble getting online on your PC, perform the network settings of your PC
in accordance with the settings of Wireless router (Access point).
trouble getting online on your PC, perform the network settings of your PC
in accordance with the settings of Wireless router (Access point).
*2
This is a name given to identify specific networks among wireless LANs.
When the SSID is the same in two devices, data can be transmitted
between them.
When the SSID is the same in two devices, data can be transmitted
between them.
Occasionally, Panasonic may release updated firmware for this
unit that may add or improve the way a feature operates.
These updates are available free of charge.
unit that may add or improve the way a feature operates.
These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen
is displayed.
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen
is displayed.
If downloading on this unit fails or this unit is not connected to
the Internet, then you can download the latest firmware from
the following website and burn it to a CD-R to update the
firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (> 40, “System
Information”)
the Internet, then you can download the latest firmware from
the following website and burn it to a CD-R to update the
firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (> 40, “System
Information”)
DO NOT DISCONNECT the unit from the AC power or perform
any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the
unit’s display. Unit will restart and the following screen will be
displayed.
any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the
unit’s display. Unit will restart and the following screen will be
displayed.
≥ You can perform update anytime by selecting “Firmware Update” in the
Setup menu. (> 40)
≥ Downloading will require several minutes. It may take longer or may not
work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set “Automatic
Update Check” to “Off”. (> 40)
Display
Check the
following
1. LAN cable connection or
Connection to access point
Connection to access point
:Fail
≥ Connection of
the LAN
cables
(
cables
(
> 18)
2. IP address setting
:Fail
3. Connection to gateway
:Fail
1. LAN cable connection or
Connection to access point
Connection to access point
:Pass
≥ Connection
and settings
of the hub
and router
of the hub
and router
≥ Settings of
“IP Address /
DNS
Settings”
(> 40)
DNS
Settings”
(> 40)
2. IP address setting
:Fail
3. Connection to gateway
:Fail
1. LAN cable connection or
Connection to access point
Connection to access point
:Pass
2. IP address setting
:Home
network
available
network
available
3. Connection to gateway
:Fail
1. LAN cable connection or
Connection to access point
Connection to access point
:Pass
2. IP address setting
:Pass
3. Connection to gateway
:Fail
Display
Check the following
Cannot find the server.
(B019)
(B019)
≥ “Primary DNS” and “Secondary
DNS” settings of “IP Address /
DNS Settings” (> 40)
Failed to connect to
the server.
(B020)
the server.
(B020)
≥ The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
suspended. Please wait a few
moments, and then try again.
≥ Settings of “Proxy Server
Settings” (> 40) and the router
OK
Network Easy Setting (Connection Test)
Yes
No
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again.
connection again.
Select “No” and press [OK] to finish Network
Easy Setting.
: Fail
: Fail
: Fail
: Fail
OK
Network Easy Setting (Internet Connection Test)
Complete.
- Connection to the Internet : Fail(B019)
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
of the error and the solution for it.
Press [OK].
Firmware updating
Firmware Update
Latest Online Version: x.xx
Current Installed Version: x.xx
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
Current Installed Version: x.xx
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
RETURN
OK
Yes
No
The firmware has been updated.
Current Installed Version
:
x.xx
RETURN
OK
SCBT735_330_230EBEPEG_VQT2Q52-B.book 21 ページ ２０１０年２月９日 火曜日 午前１０時５１分