Philips SC-BT735 用户手册

VQT2Q52

≥ The selected effect will only be displayed on the main 

unit.

While “MANUAL” is displayed, press 
[2, 1] and select the desired effect.

∫ Adjusting speaker level during play

1 Press and hold [

jCH SELECT] to activate the speaker 

setting mode.

2 Press [

jCH SELECT] several times to select the speaker.

Each time you press the button:
L R

—) C_) RS_)RB

_) LB

_)LS_) SW

^"""""""""""""""""""""""""""""b

* When the optional surround back speakers are connected.

3 Press [

3] (increase) or [4] (decrease) to adjust the 

speaker level for each speaker.
s6 dB to r6 dB

∫ Changing the sound modes

1 Press [SOUND] several times to select the mode.

≥ The selected mode will only be displayed on the main 

unit.

2 While the selected mode is displayed

Press [2, 1] and select the desired setting.

≥ The sound effects/modes may not be available or have no effect with some 

sources.

≥ You may experience a reduction in sound quality when these sound 

effects/modes are used with some sources. If this occurs, turn the sound 
effects/modes off.

Enjoying surround sound 
effects

STANDARD
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CH
You can enjoy sound from the front speakers, as well as 
the surround even when playing a 2-channel sound or 
non-surround sound.
MANUAL

DOLBY PL II MOVIE (Dolby Pro Logic II Movie)
Suitable for movie software, or the one recorded in 
Dolby Surround.
(except DivX)

DOLBY PL II MUSIC (Dolby Pro Logic II Music)
Adds 5.1-channel effects to stereo sources.
(except DivX)

7.1CH VS (7.1CH Virtual Surround)
You can enjoy 6.1/7.1-channel surround-like effect 
using 5.1-channel speakers.

S.SURROUND (Super Surround)
You can enjoy sound from all speakers with stereo 
sources.

2CH STEREO
You can play any source in stereo. Sound will be 
output to the front speakers and the subwoofer only.

L R: Front speaker (left and right:only the balance

is adjustable.)

≥ Press [2, 1] to adjust the balance of the front 

speakers.

C: Centre speaker
RS: Surround speaker (right)
RB

: Surround back speaker (right)

LB

: Surround back speaker (left)

LS: Surround speaker (left)
SW: Subwoofer
≥ The channels not included in the playing audio will not be 

displayed (subwoofer is displayed even if it is not 
included).

You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
CLEAR
Clarifies higher sounds.
SOFT
For background music.

You can adjust the amount of base.
1 (Weakest effect) to 4 (Strongest effect)
≥ The setting you make is retained, and recalled every 

time you play the same type of source.

You can enhance low-frequency sound so that heavy 
bass sound can be heard clearly, even if the acoustics 
of your room are not optimal.
≥ The setting you make is retained, and recalled every 

time you play from the same type of source.

You can make the sound of the centre speaker seem 
like it is coming from within the TV.

You can enhance the surround effect for low volume 
sound. (Convenient for late night viewing.)

SCBT735_330_230EBEPEG_VQT2Q52-B.book  24 ページ  ２０１０年２月９日　火曜日　午前１０時５１分