Philips SC-BT735 用户手册
42
VQT2Q52
Optional speaker settings
Speaker installation
option
You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached
≥ The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 kg per screw. Consult a
qualified building contractor when attaching the speakers to
a wall. Improper attachment may result in damage to the wall
and speakers.
qualified building contractor when attaching the speakers to
a wall. Improper attachment may result in damage to the wall
and speakers.
≥ Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
1
Drive a screw (not included) into the wall.
2
Fit the speaker securely onto the screw(s)
with the hole(s).
with the hole(s).
[BT735]: Front speaker, Surround speaker
[BT330]: Front speaker
Attach to a wall without the base and the stand.
[BT330]: Front speaker
Attach to a wall without the base and the stand.
[BT330]:
Surround speaker
[BT230]:
Front speaker, Surround speaker
Surround speaker
[BT230]:
Front speaker, Surround speaker
F 97 mm
G 210 mm to 212 mm
H 72 mm
I 349 mm to 351 mm
J 26 mm
G 210 mm to 212 mm
H 72 mm
I 349 mm to 351 mm
J 26 mm
[BT735]: Centre speaker
[BT330] [BT230]: Centre speaker
K 117 mm
L 209 mm to 211 mm
M 97 mm
N 18.8 mm
O 17 mm
P 99 mm to 101 mm
L 209 mm to 211 mm
M 97 mm
N 18.8 mm
O 17 mm
P 99 mm to 101 mm
∫ To avoid speaker dropping
[BT735]: Front speaker, Centre speaker, Surround speaker
[BT330]: Front speaker
[BT330]: Front speaker
e.g., [BT735]: Front speaker
≥ Consult a qualified building contractor to avoid damage to
the wall or speakers.
≥ Use a string of less than ‰ 2.0 mm, which is capable of
supporting over 10 kg.
[BT330]
Attaching to a wall
e.g., [BT735] Front speaker
DO NOT
DO
≥ In this position, the speaker
will likely fall if moved to the
left or right.
left or right.
≥ Move the speaker so
that the screw is in this
position.
position.
A At least 30 mm
B
B
‰ 4.0 mm
C
‰ 7.0 mm to 9.4 mm
D Wall or pillar
E 5.5 mm to 7.5 mm
E 5.5 mm to 7.5 mm
[BT735]
[BT330]
Reattaching the speaker cable
A String (not included)
B Screw eye (not included)
C Less than 10 cm
D Rear of the speaker
B Screw eye (not included)
C Less than 10 cm
D Rear of the speaker
Insert the cable
from the bottom.
from the bottom.
Leave about
120 mm
120 mm
Pull out the cable
through the hole.
through the hole.
SCBT735_330_230EBEPEG_VQT2Q52-B.book 42 ページ ２０１０年２月９日 火曜日 午前１０時５１分