Radio Shack XL-150 用户手册
7
Follow these steps to connect the am-
plifier to ground, switched power, and
primary power.
plifier to ground, switched power, and
primary power.
1. If you have not done so already,
disconnect the cable from your
vehicle’s negative (–) battery ter-
minal.
vehicle’s negative (–) battery ter-
minal.
2. Use a screwdriver to connect the
spade end of the supplied black
ground wire to the amplifier’s
ground wire to the amplifier’s
GND
(ground) terminal.
3. Connect the black ground wire’s
other end to a chassis ground,
such as a metal bolt attached to a
metal part of the vehicle’s frame.
Be sure the bolt is not insulated
from the chassis by a plastic part.
such as a metal bolt attached to a
metal part of the vehicle’s frame.
Be sure the bolt is not insulated
from the chassis by a plastic part.
4. Use a screwdriver to connect the
spade end of the supplied blue/
white wire to the amplifier’s
white wire to the amplifier’s
REM
(remote power) terminal.
CONNECTING GROUND AND
SWITCHED/PRIMARY POWER
12-2015.fm Page 7 Tuesday, July 13, 1999 3:47 PM