Yamaha TX6n 用户手册

 

 

 

 

 

 

• Owner’s Manual

• Two handles

• Four flat-head screws

• Euroblock connector (3P)

• Four Rubber feet

 

Operation of this device is guaranteed for an environmental temperature range of 0 – 40°C. If you are 
mounting only this device in an EIA standard rack, you may mount multiple units without leaving a space 
between them. If you are mounting this device along with other types of device in an EIA standard rack, 
the ambient temperature inside the rack may rise due to heat produced from the other devices, prevent-
ing this device from performing as designed. To ensure that heat does not build up inside this device, 
you must observe the following conditions when mounting it in a rack.
• If you mount this device in a rack together with heat-generating devices such as power amps made by 

other companies, you must leave 1U or more space between this device and other devices. You 
should also install a ventilation panel in this space or leave it open to ensure adequate ventilation.

• Leave the back of the rack open, and allow 10 cm or more distance between the rack and the wall or 

ceiling to ensure adequate ventilation. If you are unable to leave the back of the rack open, you must 
install a commercially available fan kit or other forced air circulating system to the rack. If you have 
installed a fan kit, there may be cases in which closing the back of the rack will provide better cooling. 
For details, refer to the instructions that came with the rack system or fan kit.