Earthquake Sound THOR IW--SUB10 用户手册
STEP#4
Wrap cloth around frame and put into place with
provided security ring.
provided security ring.
STEP#5
Once you have the cloth in place with security ring push
the ring enough to keep in place, though the groove with
cloth underneath.
the ring enough to keep in place, though the groove with
cloth underneath.
STEP#6
Now that you have pressed the security ring in by hand,
use your rubber mallet to finish securing it completely in
the gap.
use your rubber mallet to finish securing it completely in
the gap.
STEP#7
With your security ring in place you can begin cutting
excess cloth from the inner ring. Use extreme caution if
you choose to use a straight razor instead of a box
cutter or scissors.
excess cloth from the inner ring. Use extreme caution if
you choose to use a straight razor instead of a box
cutter or scissors.
Assembling the Custom Grille
(continued)
(continued)
Specifications
STEP#8
This is what the inside of your grille should look like.
Pouring a quick drying glue over the ring and in the
space around where the cloth is will add more support
and provide a hard shell.
Pouring a quick drying glue over the ring and in the
space around where the cloth is will add more support
and provide a hard shell.
STEP#9
This is what your finished product should look like on
and off of the sub.
and off of the sub.
STEP#10
When you have completed the project you simply push
the grille into the front of the in-wall subwoofer gently
(use the rubber mallet if needed).
the grille into the front of the in-wall subwoofer gently
(use the rubber mallet if needed).
10
Earthquake Sound Corp. | (510) 732-1000 | www.earthquakesound.com
11
Specifications are subject to change without notice.
Woofer:
10” (254mm) with 2½” excursion patented design
10” SLAPS Passive Radiator
10” SLAPS Passive Radiator
Power Rating:
50-800 Watts
RMS Power Rating:
400 Watts
Frequency Response:
20Hz-160Hz
Sensitivity:
89dB
Impedance:
4
Dimensions (HxWxD):
28” x 18 5/8” x 3 3/4” (711mm x 473mm x 95mm)
Cut out dimension (HxW):
24” x 13 3/4” (610mm x 349mm)
Mounting depth:
3 3/4” (95mm)
Finish:
white/paintable, custom grille options included