Philips FW-P900 用户手册
29
English
3139 115 20411
2
Press CD, TUNER or TAPE to select the
desired source.
desired source.
● Make sure the music source has been prepared.
CD – Load the disc(s). To start from a specific
track, make a program (refer to “CD Operation -
Programming the disc tracks”).
TUNER – tune to the desired preset radio
station.
TAPE – load the prerecorded tape into tape
deck 2.
track, make a program (refer to “CD Operation -
Programming the disc tracks”).
TUNER – tune to the desired preset radio
station.
TAPE – load the prerecorded tape into tape
deck 2.
3
Press à or á on the system repeatedly to set
the hour for the timer to start.
the hour for the timer to start.
4
Press í or ë on the system repeatedly to set
the minute for the timer to start.
the minute for the timer to start.
5
Press CLOCK/TIMER to store the start time.
➜ The timer is now set and activated.
➜
TIMER
will remain on the display.
● At the preset time, the selected source will be
played.
To exit without storing the setting
● Press Çon the system.
Notes:
– If the selected source (CD or TAPE) is not
available when preset timer is reached, TUNER will
be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
– If the selected source (CD or TAPE) is not
available when preset timer is reached, TUNER will
be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
To deactivate the TIMER
● Press TIMER ON/OFF on the remote control.
➜ The display will show "CANCEL" and
TIMER
will disappear from the display.
To activate the TIMER
● Press TIMER ON/OFF on the remote control.
➜ The last timer setting will be shown for a few
seconds and
seconds and
TIMER
will appear on the display.
Sleep Timer Setting
The sleep timer enables the system to switch to
Standby mode automatically at a preset time.
Standby mode automatically at a preset time.
1
Set the clock (refer to “Clock Setting”).
2
Press SLEEP on the remote control repeatedly
to select a preset time.
➜ The selections are as follows (time in
minutes):
to select a preset time.
➜ The selections are as follows (time in
minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™ 60 …
➜ "SLEEP XX" or "OFF" will be displayed. "XX"
is the time in minutes.
is the time in minutes.
3
When you reach the desired length of time, stop
pressing the SLEEP button.
pressing the SLEEP button.
➜ The Sleep Timer is now set. After this
amount of time passes, the system will switch to
Standby mode.
amount of time passes, the system will switch to
Standby mode.
To deactivate the Sleep Timer
● Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
Clock/Timer
pg 001-033/P900/37-Eng
12/8/00, 1:53 PM
29