Philips FW-C72 用户手册
3139 116 19521 (ENG)
22
RECORDING
CLOCK
4 Press DUB (HSD) once for
normal speed dubbing or twice
(within 2 seconds) for high speed
dubbing.
™ “NORMAL” (normal speed) or
(within 2 seconds) for high speed
dubbing.
™ “NORMAL” (normal speed) or
“
FAST” (high speed) will be
displayed, followed by “
DUB“ with
“
< or >” scrolling left or right
depending on the tape side
selected.
selected.
™ The
HSD
appears on the display
during high speed dubbing.
• Dubbing will start immediately.
™ The
REC
starts flashing.
5 Press Ç to stop dubbing.
Notes:
– Only
– Only
å
å
å
å
å mode is available during
dubbing.
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of
the same length.
– During high speed dubbing in Tape
mode, the sound is reduced to a low
volume.
volume.
– You can listen to another source while
dubbing.
View Clock
You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (CD, TUNER,
etc.). The clock will be displayed for
about seven seconds.
system is in Standby mode or when any
sound source is selected (CD, TUNER,
etc.). The clock will be displayed for
about seven seconds.
• Press
CLOCK/TIMER briefly.
™ “PM 10:38 or 22:38 ” (the
current time) will be displayed
depending on whether you have
selected 12- or 24-hour mode.
depending on whether you have
selected 12- or 24-hour mode.
™ “--:::::--” will be displayed if the
clock is not set.
Note:
– When the system goes into low power
– When the system goes into low power
standby mode, the clock setting will not
be displayed (for model FW-C72 only).
be displayed (for model FW-C72 only).
Clock Setting
The clock can be set in either 12- or
24-hour mode, e.g. “
24-hour mode, e.g. “
AM 12:00“ or
“
00:00“. Before setting the clock, you
must be in the View Clock mode.
1 Press CLOCK/TIMER to select
clock mode.
2 Press PROG (on the system only) to
select 12- and 24- hour mode.
™ If 12-hour mode is selected, “AM
™ If 12-hour mode is selected, “AM
12:00“ starts flashing.
™ If 24-hour mode is selected,
“
00:00” starts flashing.
3 Set the hour with␣ à or á on the
system.
4 Set the minute with␣ í or ë on
the system.
5 Press CLOCK/TIMER again to
store the setting.
™ The clock starts.
™ The clock starts.
SHUFFLE
PROGRAM
FM
STEREO
BACK
HSD
REPEAT
REC
LW
MW
AM
T.A.
NEWS
SOUND NAVIGATION
TAPE
CD
PROG
CLOCK/
TIMER
TIMER
NEWS!
RDS
DOLBY B
NR
DUB
(HSD)
REC
STANDBY
ON
ON
SIDE A•B
A.REV
TUNER
AUX
PRESET ▲
▲
STOP • CLEAR
SEARCH • TUNING
PLAY
PAUSE
PREV
NEXT
MINI HIFI SYSTEM
C D 1 • 2 • 3
CDR / VIDEO
FM • AM
TAPE 1 • 2
TIMER
FRONT
60Hz
500Hz
250Hz
1KHz
2KHz
4KHz
8KHz
VOLUME
S
S
L
R
C
PRO LOGIC
SIDE
DYNAMIC BASS
BOOST
BOOST
INCREDIBLE
SURROUND
SURROUND
DIGITAL
SOUND CONTROL
CD Synchro Start
Recording
Recording
1 Load a blank tape into tape deck 2
and a disc into a disc tray.
2 Press CD to select CD mode.
• You can program the tracks in the
• You can program the tracks in the
order you want them to be recorded
(see Programming Tracks). If not,
select the disc by pressing
(see Programming Tracks). If not,
select the disc by pressing
CD
(CD 1•2•3) and the tracks are
recorded according to the order on
the selected disc.
recorded according to the order on
the selected disc.
3 Press REC to start recording.
™ The
REC
starts flashing.
• CD will start playback automatically.
4 Press Ç to stop recording.
4 Press Ç to stop recording.
One Touch Recording
• For One Touch Recording, as soon as
you press
REC, the current source
(CD, TUNER or AUX) will be
recorded on tape deck 2.
recorded on tape deck 2.
1 Load a blank tape in tape deck 2.
2 Press REC to start recording.
2 Press REC to start recording.
™ The
REC
starts flashing.
3 Press Ç to stop recording.
Note:
– When you press RECORD while in
– When you press RECORD while in
TAPE mode, "
SELECT SOURCE"
will be displayed. One Touch Recording
is not possible in TAPE mode.
is not possible in TAPE mode.
pg 01-27/C71-C72/37-Eng
12/16/99, 1:20 PM
22